Connecting Your Vcr To The Satellite Receiver Or Other Equipment - Samsung SV-620B Instruction Manual

00007A SV-623B-GB1 9/5/56 7:48 AM Page 12

Connecting Your VCR to the Satellite receiver or Other Equipment

GB
You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The following illustrations give a few examples of the
connection possibilities.
1. AV1(EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV1(EURO AV) socket on the rear of the
VCR.
After making this connection, select the source by pressing the INPUTbutton for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 60, which is used by the VCR,
e.g. re-adjust to channel 65.
Satellite Receiver or other Equipment
1
SCART Cable
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 IN socket on the rear of the VCR.
After making this connection, select the source by pressing the INPUTbutton for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 60, which is used by the VCR,
e.g. re-adjust to channel 65.
Satellite Receiver or other Equipment
1
12
A e r i a l
Aerial Connector
2
T V
A e r i a l
Aerial Connector
2 T V
SCART Cable
SCART Cable
Plug & Auto Set Up
Your VCR will automatically set itself up when it is plugged into the
mains for the first time. TV stations will be stored in memory. The
process takes a few minutes. Your VCR will then be ready for use.
1 Connect the coaxial cable as indicated on page 11.
(Connecting Your VCR to the TV Using the Coaxial Cable)
2 Plug the VCR into the mains. It will automatically tune itself in and
store TV stations in the memory.
3
The process will finish after a few minutes. Then the VCR
automatically switches itself off.
Now, you only have to switch the VCR on and it is ready
for use.
GB
TV
2
13