Connecting Your Vcr To The Satellite Receiver Or Other Equipment - Samsung SV-M30K Instruction Manual

Connecting Your VCR to the Satellite receiver or Other Equipment

You can connect your VCR to the Satellite receiver or
other VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The
following illustrations give a few examples of the
connection possibilities.
1
AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV1 (EURO AV) socket on
the rear of the VCR.
After making this connection, select the source by
pressing the input button for the AV1 input sources.
2
By means of RF Coaxial Cable
After making this connection, you must preset the
station received through the satellite tuner.
RF output channel of the satellite receiver should
be adjusted away from channel 36, which is used
by the VCR, e.g. re-adjust to channel 33.
Satellite Receiver or other
Equipment
SCART Cable
TV
1
Aerial
Aerial Connector
2
AV2 (SATELLITE IN)
R
AV1 (EURO AV)
TV
L
1
AV2 IN: By means of 21-pin Scart Cable
When the satellite receiver or other equipment is
connected to the AV2 socket.
Plug the SCART Cable with satellite receiver or
other equipment into the AV2 (DEC./EXT.) socket
on the rear of the VCR.
After making this connection, select the source by
pressing the input button for the AV2 input sources.
2
By means of RF Coaxial Cable
After making this connection, you must preset the
station received through the satellite tuner.
Satellite Receiver or other
Equipment
TV
SCARTC
able
ENG-10
Aerial
Aerial Connector
2
1 SCART Cable
AV2 (SATELLITE IN)
R
AV1 (EURO AV)
TV
L