Product Features - Dell P3424WE User Manual

Product features

The Dell P3424WE monitor has an active matrix, Thin-Film Transistor (TFT),
Liquid Crystal Display (LCD) and LED backlight. The monitor features include:
• 86.72 cm (34.14 in.) viewable area (measured diagonally). 
3440 x 1440 (21:9) resolution, plus full-screen support for lower resolutions.
• Wide viewing angle to allow viewing from a sitting or standing position.
• Color gamut of 99% sRGB.
• Digital connectivity with DisplayPort, USB Type-C and HDMI (supports up to
WQHD 3440 x 1440 at 60 Hz as per specified in HDMI 2.1).
• Single USB Type-C to supply power (PD 90W) to a compatible notebook
while receiving video & data signal.
• Tilt, swivel, height, and slant adjustment capabilities.
• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling
easier setup with an elegant viewing experience.
• Removable stand and Video Electronics Standards Association (VESA™)
100 mm mounting holes for flexible mounting solutions.
• Equipped with 1 USB Type-C upstream port, 1 USB Type-B upstream port, and
4 USB Type-A downstream ports.
• USB-C and RJ45 ports enable a single-cable, network-connected experience.
• Plug and play capability if supported by your system.
• The built-in KVM switch allows you to control up to 2 computers from a single
set of keyboard and mouse connected to the monitor.
• Supports Auto KVM for multiple input setup.
• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Supports Picture by Picture (PBP) and Picture in Picture (PIP) Select mode.
• Power and joystick buttons lock.
• Security lock slot.
• Stand lock.
• Power consumption < 0.3 W in Standby Mode.
• Optimize eye comfort with a flicker-free screen and ComfortView Plus feature.
• This monitor uses low blue light panel. When the monitor is reset to factory
settings or default setting (Preset mode: Standard), it works in compliance
with TÜV Rheinland (hardware solutions provider).
About your monitor
│
9