ASROCK W480D2I User Manual page 81

Table of Contents

The default login information for the IPMI web interface is:

Username: admin

Password: admin

For more instructions on how to set up remote control environment and use the IPMI man-

agement platform, please refer to the IPMI Configuration User Guide or go to the Support

website at: http://www.asrockrack.com/support/ipmi.asp

VLAN

Enabled/Disabled Virtual Local Area Network.

NCSI(eth0)

Manual Setting IPMI LAN

If [No] is selected, the IP address is assigned by DHCP. If you prefer using a static IP

address, toggle to [Yes], and the changes take effect after the system reboots. The default

value is [No].

Configuration Address Source

Select to configure BMC network parameters statically or dynamically(by BIOS or BMC).

Configuration options: [Static] and [DHCP].

Static: Manually enter the IP Address, Subnet Mask and Gateway Address in the BIOS for

BMC LAN channel configuration.

DHCP: IP address, Subnet Mask and Gateway Address are automatically assigned by the

network's DHCP server.

When [DHCP] or [Static] is selected, do NOT modify the BMC network settings on the

IPMI web page.