ASROCK W480D2I User Manual page 28

USB 3.2 Gen1 Header
(19-pin USB3_5_6)
(see p.6, No. 20)
System Fan Connectors
(4-pin FAN2)
(see p.6, No. 7)
(4-pin FAN2)
(see p.6, No. 8)
(4-pin FAN3)
(see p.6, No. 9)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.6, No. 1)
1
Dummy
IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
IntA_PB_D- GND
GND
IntA_PA_SSTX+
IntA_PB_SSTX+
IntA_PA_SSTX-
GND
IntA_PB_SSTX-
GND IntA_PA_SSRX+
IntA_PB_SSRX+ IntA_PA_SSRX-
IntA_PB_SSRX- Vusb
Vusb V
FAN_SPEED_CONTROL
FAN_SPEED
FAN_VOLTAGE
GND
GND
1
5
12V
W480D2I / Z490D2I
Besides two default USB 3.2
Gen1 ports on the I/O panel,
there is one USB 3.2 Gen1
header on this motherboard.
This USB 3.2 Gen1 header
can support two USB 3.2 Gen1
ports.
Please connect fan cables to the
4
fan connector and match the
3
black wire to the ground pin.
2
1
All fans support Fan Control.
The motherboard provides one
4
8-pin 12V power connector
8
which is a required input for
either DC-IN 12V or ATX
+12V power source.
When using ATX power, it is
necessary to use a 24pin-to-
4pin power cable to connect
between the 24pin power
connector of PSU and the
ATX4PIN1 connector on the
motherboard for power supply
and signal communication.
21