Related Manuals for PASI WMS-INT
Summary of Contents for PASI WMS-INT
- Page 1 User Manual Oil/Water Interface Meter Ver.01.2023 P.A.S.I srl – via Galliari 5/E – 10125 TORINO – Italy Tel. +39 011 650.70.33 – Fax +39 011 658.646 - E-mail sales@pasisrl.it www.pasisrl.it...
-
Page 3: Table Of Contents
Table of Contents Table of Contents ......................2 Important Notice ....................... 3 Information about warranty and safety notes ..............4 Introduction ....................... 5 Technical Specification ..................... 6 Millimeter Cable ......................6 Probe ..........................6 Main Characteristic ....................... 6 Level Indicator ......................7 Power supply ......................... -
Page 4: Important Notice
P.A.S.I. products have not been designed to be used in any way or application other than those mentioned. Torino, Italy 2023 Copyright: 2023 P.A.S.I. srl INTERFACCIA WMS-INT REV 1.0... -
Page 5: Information About Warranty And Safety Notes
- To avoid damage, use only original accessories or approved by PASI srl. - When a suitable location has been selected for the device, it must be ensured that no water can get into the device under any conditions. -
Page 6: Introduction
1. Introduction PASI WMS-INT it’s a water-oil interface meter and a water level meter. The water level is readable on the millimetre cable. The device in made of an acoustic indicator that notify the entrance and the exit in a liquid and with a LED indicator on the front panel. -
Page 7: Technical Specification
2. Technical Specification Millimeter Cable Flat Millimeter cable with steel ribbon core and 2 copper conductors (10x2 mm), covered with a transparent scratchproof Polyurethane sheath. The millimeter black indication is present all over the length of the cable, centimeters and decimeters in black color, meters indication in red color. -
Page 8: Level Indicator
When the battery is low, the LED indicator will flash 10 times with a frequency of 1 second and then turn off automatically. User interface Button Single button for power on, power off and setting settings Cable reel Materials PVC and metal Weight 1.5Kg, 2.1Kg, 3.1Kg Cable lenghts 30m, 50m, 100m INTERFACCIA WMS-INT REV 1.0... -
Page 9: User Interface, Functionality And Maintenance
3. User interface, functionality, and maintenance The instrument probe is equipped with two sensors for liquid detection: 1. Optical sensor 2. Electrical conductivity sensor The optical sensor consists of a prism and an infrared emitter-receiver pair. This sensor can identify whether the probe is immersed or not in a liquid, however it cannot discern the type of substance. -
Page 10: Panel
The user interface consists of a single button with which all functions can be performed. The instrument detects the number of pushes or the press time to perform specific function: • Power on; • Power off; • Deactivation of the sound indicator; • Auto-off counter reset. INTERFACCIA WMS-INT REV 1.0... -
Page 11: Power On
Power on: To turn the instrument on, you must press and hold the ON/OFF button until a pulsing sound is made, indicating that the instrument is active and ready to work.. Power off: Turning off is done by prolonged pressure; when the instrument beeps an intermittent sound you can stop pushing the button and the instrument will turn off. - Page 12 To keep the measuring sensor clean and precise it is recommended to clean it on regular bases. To clean the probe, we recommend to use denatured ethyl alcohol and then rinse it in distilled water. INTERFACCIA WMS-INT REV 1.0...