Searching For And Storing The Radio Stations - Hyundai MX-KDZ100 Instruction Manual

Searching for and Storing the Radio Stations

GB
You can store up to:
15 FM stations
15 AM(MW) stations
1
Switch the system on by pressing Standby/On button.
2
Select the TUNER function by pressing TUNER button.
3
Select the required frequency band by pressing TUNER Band button
again on the front panel or Tuner button on the remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
4
To search for a
station...
Manually
Automatically
5
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to increase or
decrease the frequency respectively.
or
Press the Tuning
To scroll through the frequencies faster when searching
manually, hold down the Tuning Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
Adjust the volume by:
Turning the Volume knob on the front panel.
or
Pressing the VOL. + or – buttons on the remote control.
7
Select the stereo or mono mode by pressing MO/ST button.
25
Frequency Modulation
Medium Wave
Press Tuning Mode
One or more times until MANUAL is
displayed.
One or more times until AUTO is
displayed.
or button on the remote control.
Disc Skip 0 EQ Cancel/Clear
MO/ST
DVD-OK/DVD/TUNER
7
Down Up
Tuning
4
Enter
5
5
Searching for and Storing the Radio
Stations (continued)
8
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press the Program button.
Result: The PRGM is displayed for a few seconds.
b Press the Tuning buttons to assign a program numeric
between 1 and 15.
c Press the Program button to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
9
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program numeric.
You can also use Program/Set button on the remote control
to instead Program button in step 8.
In Tuner mode
In manual tuning mode, you can use Multi Jog or
buttons to manual search a radio station.
During Tuner auto searching, press Stop(
searching.
In Preset tuning mode, you can use Multi Jog or
buttons to search a stored radio station.
/
) button to stop auto
/