Loading And Changing Discs - Hyundai MX-KDZ100 Instruction Manual

Loading and Changing Discs

GB
The disc changer can contain up to three 12 cm or 8 cm discs
without using an adapter.
Never force the disc carrousel when opening and
closing the compartment.
Never press down or place objects on the carrousel.
Always treat your discs with care; refer, if necessary, to the section
entitled "Precautions When Using Discs" on page 33.
1
Switch the system on by pressing Standby/On button.
2
Press the Open/Close(
Result: The compartment opens.
3
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the disc has been correctly inserted in the holder
before closing the compartment.
4
If you wish to load a third compact disc, press the Disc Change
button on the front panel (or Disc Skip button on the remote control).
Result: The carrousel rotates by 120°.
13
) button on the front panel.
5
Close the compartment by pressing the Open/Close(
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play...
Disc 1
Disc 2
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
) button
Press...
DVD/DVD-OK( ) or Disc 1
Disc 2
Disc 3