Advertisement
Arize
Factor
®
Driver Output and Lightbar Electrical Connections
RISK OF ELECTRIC SHOCK OR PRODUCT DAMAGE
Turn power OFF before inspection, installation or removal.
DO NOT MAKE OR BREAK ELECTRICAL CONNECTION WHILE POWER IS APPLIED.
Male
Lightbar
Mate male connector from lightbar with female connector from DC output of
1
driver. Ensure matching up the key guides from Male to Female connector.
Connection Schematic
Driver Input Wire Colors
Black = Line 1
White = Neutral or Line 2
Yellow/Green = Ground
Use proper circuit
protection level
AC line
WARNING / AVERTISSEMENT
RISQUE DE CHOC ÉLECTRIQUE OU DE DOMMAGE AU PRODUIT
Coupez l'alimentation avant l'inspection, l'installation ou la désinstallation.
Female
Driver
Secure locknut
N
L3
L2
L1
REPEAT FOR ENTIRE CIRCUIT BALANCING OUT EACH PHASE
*White = Neutral or Line 2
2
3
Optional 3'or 6' interconnection cable
NOTE: Maximum cumulative length of
interconnection cable is 6 feet.
Key
3-Phase Y
*
*
*
Driver
Driver
Driver
8
Installation Guide
AC line
To driver
input
Connect the green wire
2
to the incoming ground
conductor. Connect the black
wire to Line 1 and white
wires to Neutral or Line 2 of
the incoming AC line.
3-Phase ∆
Driver
Driver Driver
Lightbar
Lightbar
1
Advertisement
