Maintenance - Husqvarna 967 97 40-03 Quick Manual

Formoreinformationandinstructions,readthecompleteOperator'smanualontheHusqvarnawebsite
(www.husqvarna.com)
1. PL ACEMENT OF AND CONNECTING THE CHARGING STATION
1. Place the charging station at a central position in the working area, with a lot of open space in front of the charging station
andonarelativelyhorizontalsurface.
2. Connectthepowersupply'slowvoltagecabletothechargingstationandthepowersupply.
3. Connectthepowersupplytoa100-240Vwallsocket.
4.  P lacetheroboticlawnmowerinthechargingstationtochargethebatterywhiletheboundarywireislaid.PresstheON/OFF
button for 3 seconds and make sure that the indicator lamp on the button is lit.
2. PL ACEMENT OF THE BOUNDARY WIRE AND THE GUIDE WIRE
1.  L aytheboundarywiresothatitformsalooparoundtheworkingarea.
2. Makeaneyeletatthepointwheretheguidewirewilllaterbeconnected.
3.  R untheguidewiretothepointontheboundaryloopwheretheconnectionwillbemade.Avoidlayingthewireattight
angles.
3. CONNECTING THE BOUNDARY WIRE AND THE GUIDE WIRE
1.   N arrowpassagesintheyardmakeitdifficultfortheroboticlawnmowertofindthechargingstation.Theroboticlawnmower
canbeleadtoremoteareasusingtheguidewire.Theguidewirealsohelpstheroboticlawnmowertoquicklyfindthe
charging station.
2.  L aytheguidewireunderthechargingstationandatleast2m/7ftstraightoutfromthefrontedgeofthechargingstation.
3. Opentheconnectorsandlaythewireendsintherecessesoneachconnector.
4. Press the connectors together using a pair of pliers.
5. Cutoffanysurplusboundarywire.Cut1-2cm/0.4-0.8"abovetheconnectors.
6.   P resstheconnectorsontothecontactpins,markedAL(left)andAR(right),onthechargingstation.Itisimportantthatthe
right-hand wire is connected to the right-hand contact pin, and the left-hand wire to the left-hand pin.
7. Fasten the connector to the contact pin marked G1 on the charging station.
4. CONNECTING THE GUIDE WIRE TO THE BOUNDARY WIRE
1. Cuttheboundarywirewithawirecuttersatthecentreoftheeyeletthatwasmadeinstep2.2.
2.  C onnecttheguidewiretotheboundarywireusingtheaccompanyingcouplers.Pressthecouplerscompletelytogetherwith
apolygrip.
STARTING AND STOPPING
STARTING
1. OpenthecoverbypressingtheSTOP button.
2. Press the ON/OFFbuttonfor3seconds.Whenyoudothisforthefirsttime,astartupsequencestartswhereyouselecta 
four digit PIN code among other things.
3. Press the START button and close the cover.
STOPPING
Press the STOP button.
ADJUSTING THE ROBOTIC L AWN MOWER TO SUIT THE SIZE OF YOUR L AWN
Themowingresultsdependonmowingtime.AdjustthemowingtimetosuityouryardusingtheSchedule function. You decide
whattimesduringthedaytheroboticlawnmoweristowork.Theroboticlawnmowercutapproximately60m²/650ft²perhour
andday.Forexample;ifyouryardconsistsof500 m² / 5400 ft² oflawn,theroboticlawnmowershouldwork8.5hoursaday.

MAINTENANCE

1. Press the ON/OFF button for 3 seconds to disable the product and check that the indicator lamp on the button is not lit
 beforeallworkontheroboticlawnmower'schassis,suchascleaningorreplacingtheblades.Replacethebladesregularly
for the best mowing result.
2. Never use a high-pressure washer to clean the robotic lawn mower. Never use solvents for cleaning. Clean the product with
a brush or running water from a water hose.
3.  A llconnectionstothechargingstation(powersupply,boundaryandguidewire)mustbedisconnectedifthereisariskofa
thunderstorm.
4. Fullychargethebatteryattheendoftheseasonbeforewinterstorage.
QG_P12_1142653.indd 6 QG_P12_1142653.indd 6
en
2020-12-30 9:47:40 2020-12-30 9:47:40