Cable Connections - D-Link DCS-6517 User Manual

5 megapixel day & night outdoor dome network camera

Hide thumbs Also See for DCS-6517:

Table of Contents

Installation

Basic Connection (without PoE)

1. Connect the camera to your switch or router via Ethernet cable.

2. Connect the power cable from the camera to the supplied power adapter.

3. Connect the supplied power adapter to a power outlet.

Connection Using a PoE Switch

If using a PoE switch or router, connect the network camera via Ethernet cable.

PoE will transmit both power and data over a single cable.

Note: Once power has been established, the LED will turn red. When the device has obtained an IP address and is accessible, the LED

will turn green.

D-Link DCS-6517 User Manual

Cable Connections

Table of Contents