Cable Connections - D-Link DCS-7110 Quick Installation Manual

Full hd day & night network camera
Hide thumbs Also See for DCS-7110:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Cable Connections

Basic Connection (without PoE)
1. Connect the camera to your switch or router via Ethernet cable.
2. Connect the power cable from the camera to the supplied power adapter.
3. Connect the supplied power adapter to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable.
Note: Once power has been established, the LED will turn red. When the device has
obtained an IP address and is accessible, the LED will turn green.
6
D-Link DCS-7110 Quick Install Guide

Advertisement

Table of Contents
loading

Table of Contents