Table of Contents
Advertisement
I want to use content using multiple connections.
I want to set multiple times.
I want to move to other screens.
I want to display other information including the time while my digital photo frame is
turned on.
I want to update firmware.
I want to use content using multiple connections.
By connecting a USB storage media or a CF/SD/MMC card to your digital photo frame and turning it on, the
Contents List screen appears automatically and your digital photo frame loads the contents from the connected
storage media and card.
Configuring the
Address Before
Using Server
Using Server
Using a Device
Connected via
USB Port
Using
SD/MMC/CF
Card
Select the Setup of
.
Select the Networks.
Enter the IP address of your digital photo frame in the IP Setup.
Enter the IP address that Server provides in the Server Address.
Select OK.
Select the Contents List of
.
Select Server.
View the images uploaded to Server.
If your internet service is normal but you cannot connect to Server, contact a service
center so that a service engineer calls on you. For other problems, you need to
personally visit a Samsung service center.
Select the Contents List of
.
Select USB.
Connect an external storage media and turn on your digital photo
frame. It will automatically load the contents from the external
media.
It loads all files from the external storage media.
The more files there are, the more time is required to list the files in
the Contents List.
Insert a memory card into the card slot in the correct direction.
Select the Contents List of
.
Select SD/MMC or CF according to the type of the card inserted.
When stopping using the external memory and inserting a memory
card into the card slot, your digital photo frame loads the contents
automatically.
Advertisement
Table of Contents
