Table of Contents
Advertisement
3. Other Alarm Visual And Audible Indicators
Operational Mode Visual Indications
Normal (standby)
Test (button press
when no alarm
condition is
present)
(Note: Test is very
loud, stand a few
feet away.)
Smoke alarm
Memory (unit
has experienced
a smoke alarm
event.)
Smoke alarm
Hush® Mode
(SMaRT Hush®
cONTROL)
initiating alarm
(multiple alarms in
an interconnected
system)
6
AC power: Green LED on
continuously.
DC power: Green LED blink
approx every 60 sec.
Red LED blinks in time with
alarm pattern.
Red LED blink every 16 sec. After button push, voice
Red LED blinks every 2 sec.
Red LED blinks in time with
alarm pattern indicat-
ing that this is the unit
initiating the alarm in an
interconnected, multiple
alarm, system.
NOTE: It is possible for
more than one unit to
detect a hazard and
become an initiating alarm
unit (Red LED blinking).
Audible Indications
•
Single beep.
•
3 long beeps, voice "Fire!", 3
long beeps, 4 quick beeps,
Voice "Warning, Carbon
Monoxide,"
4 quick beeps.
"Smoke
previously detected" .
After button push, voice
"Hush Mode Activated."
Smoke alarm pattern stops.
(If there is too much smoke
to allow Hush® : voice "Too
Much Smoke, Cannot be
Hushed", Smoke alarm pattern
continues.)
Unit in smoke alarm mode.
Action/Note
Perform Test/Hush®
button press once a week
to verify proper alarm
operation.
* NOTE: On DC power,
alarm memory is only
retained for 24 hrs.
Push test button to clear
Alarm Memory.
This feature is to be used
only when a known alarm
condition, such as smoke
from cooking, activates
the alarm.
Advertisement
Table of Contents
