Bush VL24HDLED Instruction Manual page 35

Standard features
Simple everyday use
Advanced Settings
Press the or OK button to enter Advanced Settings
menu. Then press the  buttons to change the
following settings.
• PVR&Time-Shift Settings
Disk: The path of the current usb flash drive.
Timeshift: Set file size of TimeShift.
Format: Format flash drive.
Speed Check: Check the speed of the usb flash drive.
Hearing Impaired: Auxiliary functions for hearing
impairment. Press  button to select on or off.
• Blue Screen: Blue screen is displayed when there is no
signal. Press  button select on or off.
• Setup Wizard: Select into "First time installation".
• Entertainment: Press  button to select Store mode
on or off.
• Restore to Default: Select to restore defaults.
3. Press the EXIT button to exit the menu.
Entertainment
Using the Features via USB Port
1. Switch off the TV before connecting any USB storage
device.
2. Connect your USB storage device to the USB port of
your TV.
3. Press the button on the back of the TV or the button
on the remote control to turn on your TV and your USB
storage device.
4. Press the INPUT button on the remote control to
display the Source List. Use the buttons to select
MEDIA and then press the OK button to confirm.
Attention:
Some versions of portable hard disk may require more
power than the TV USB socket can provide. To ensure
correct operation please use power adapter for that
device.
• If a USB hub is used make sure its mains adapter is
connected to the mains supply as the total current
consumption exceed 500mA.
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.
• The maximum supported storage space of the hard
disk is 1 TB.
• The file system only support FAT32 format.
• If you want to store the video streaming of a DTV
programme, the transfer rate of the USB storage device
must not be less than 5MB/s, otherwise the picture and
sound of the programme will be affected and a warning
statement will be shown on the screen. If this happens,
please upgrade your USB storage device.
• The TV screen will be blank temporarily as it will take
time to start up and stabilize the connected hard disk.
This is normal and the starting time may vary depending
on the brand and the memory size of the connected
hard disk.
• Disconnect the USB storage device if it is not in use.
Viewing Photo
1. Press the INPUT button on the remote control then
press the  buttons to MEDIA and then press the
OK button.
2. Press the  buttons to select Photos and then
press the OK button.
3. Press thebuttons to select the picture file and
then press the OK button.
4. Press the MENU button to display the function bar:
Previous / Rotate+ / Pause(Play)/ Rotate-/ Next / Repeat
/ Playlist / Info.
5. Press the EXIT button to return to the previous menu.
Listening to Music
1. Press the INPUT button on the remote control then
press the  buttons to MEDIA and then press the
OK button.
2. Press the  buttons to select Music and then
press the OK button.
3. Press thebuttons to select the music file and
then press the OK button.
4. Press the MENU button to display the function bar:
Repeat /Previous / FB/ Pause(Play)/ FF / Next / Encoding.
Standard features
35