Play Recorded Programme - Bush VL24HDLED Instruction Manual

Standard features
Simple everyday use

Play Recorded Programme

You can play a recorded programme from the recorded
programme list or from a USB Storage Device.
1. Press the INPUT button on the remote control then
press the buttons to select the Media mode and
then press the OK button to select your storage device
and then press the OK button.
2. Press the buttons to select Movies and then
press the OK button.
3. Press the  buttons to select your recorded
programme and then press the OK button to view.
4. Press the OK button or the INFO button to display
the function bar. Press the buttons and then press
the OK button to select the function: Previous / FB /
Pause(Play) / FF / Next / Repeat / Playlist / Info / Zoom.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
30
Standard features
5. Press the EXIT button to return to the previous menu.
Quick Settings management (ATV /
DTV Mode)
1. Press the MENU button to display the main menu.
Press the OK buttons to select Quick Settings in the
main menu, it will highlight the first option.
2. Press the  buttons to change the following
settings.
Audio Language (DVT mode)
Press the  buttons to select your desired Audio
language.Press the buttons to select L/R.
Audio Language (AVT mode)
Language selection for dual language broadcast.
If a programme can be received in two languages (dual
language), you can swith to DUAL I, DUAL II or Mono by
pressing the AUDIO button repeatedly.
When a programme is selected, press the AUDIO button
to select Stereo,Dual I, Dual II and Mono.
Subtitle Language
Press the  buttons to select your desired subtitle
language.
Record List
Select Record List to check the information of the
connected USB storage device for PVR.