Table of Contents
Advertisement
Standard features
Simple everyday use
Timer Programming
This function is used for scheduled recording. The
recording from timer programme or direct recording
may have a little bit of delay when it starts to record the
broadcast programme.
Please make sure the USB device is inserted. If not, a
warning message will pop up.
1. Press the EPG button on the remote control.The EPG
menu will appear.
●
2. Press the
(REC) button on the remote control
while on the selected programme, the PVR menu will
be displayed. Press the buttons to select the
settings in the Record menu for the Repeat, Record
time.
Repeat
Press the buttons to select the Repeat (Once / Every
day / Weekly).
Record time
Press thebuttons to adjust the start time and the
end time
3. After finishing all the recorder adjustments, press the
Save button to confirm your settings.
4. The Record Setting List will then be displayed with
your preset reminders shown.
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.
5. Press the EXIT button to exit EPG.
recording automatically.
standby mode, the LED indicator will alternatively
flash red and blue.
Standard features
29
Advertisement
Table of Contents
