Battery - SanDisk SDMX14R-004GK-A70 User Manual

6

Battery

7 Charging
8 Play/Pause
9 Time
10 Progress Bar
11 Album Artwork
12 Shuffle
Battery
The Sansa Fuze player comes with an internal rechargeable battery. The battery is not
replaceable. Remember to fully charge the battery prior to your first use.
Battery Level Indicator
The battery level indicator is located at the bottom-right corner of the screen.
Battery Full
Charging
To charge the battery, please follow these steps:
1. Connect the larger end of the Sansa cable into the Sansa player.
2. Connect the smaller end of the Sansa cable into an available USB port on the
computer.
3. The computer must be on for all the USB ports to charge the battery. Your
Sansa will show connected and the yellow charging indicator will appear. The
battery level indicator will blink while charging. You will not be able to play
music, watch videos, or view photos while the player is connected to the
computer.
4. To stop recharging, simply disconnect the cable.
The battery can also be charged using an AC adapter (not included) or a car adapter
(not included); you will be able to play your device while charging with one of the
adapters.
NOTE: Some low-power USB ports may not provide enough power to charge the
Sansa player. If the device does not charge, use the USB port located at the rear
of the computer.
TM
Sansa® Fuze Overview
Displays battery level
Indicates player is being charged
Displays music or recording file playback status
Display the time (Hour and minutes)
Displays progress of the current track
Displays artwork of the album
Indicates that the shuffle function is enabled
Battery Low
9