ENGLISH
Playing back the Tape
Setting the Remote Control
The REMOTE CONTROL ON/OFF method in PLAYER mode is the same as the REMOTE CONTROL
ON/OFF method in CAMERA mode, except that the power switch must be set to PLAYER instead of
CAMERA. Please refer to page 46.
DSE in PLAYER mode
The procedure for using DSE in PLAYER mode is the same as the procedure for using DSE in
CAMERA mode, except that the power switch must be set to PLAYER instead of CAMERA.
Please refer to pages 36 and 37.
Note:
The WIDE(16:9), CINEMA, SEPIA, GHOST, STROBE and LSS effects
will not operate when your camcorder is in PLAYER mode.
The selected DSE effect will operate when the DSE button is pressed.
Maintenance
Cleaning and Taking care of the Camcorder
Cleaning the Viewfinder
Releasing the Eyecup
1. Pull EVF up and then turn the screw counter-clock-wise.
2. Pull EYECUP out.
3. Clean the EYECUP and the VIEWFINDER screen
with a soft cloth and cotton swab or a blower.
Reattaching the Eyecup
4. Put the EYECUP on the VIEWFINDER.
5. Put the screw back on.
52
1
3
2
4