Samsung VP-M50 Owner's Instruction Book page 13

Getting to Know Your Camcorder
OSD (On Screen Display)
j. Time (see page 38)
Indicates the time of the shooting.
k. Title (see page 40)
Indicates the title of the recording.
It is superimposed on the scene.
l. Self diagnosis (see page 55)
(TAPE, TAPE END) Checks the operation of the Camcorder.
m. DSE (Digital Special Effect) (see page 36)
Indicates the DSE mode is activating.
The operation modes are MAKE-UP, EMBOSS, WIDE(16:9), CINEMA, NEG., MIRROR, MOSAIC,
B&W, SEPIA, GHOST, STROBE and LSS.
n. Tape counter
Indicates amount of the tape used.
We recommend that you reset the tape counter with the COUNTER RESET button before you start
shooting.
o. Operation mode
Indicates the operation mode is activating.
The operation modes are STBY, REC, STOP, PLAY, FF, REW.
p. Hi8 (VP-M54 only) (see page 50)
Indicates the use of the Hi8 tape in shooting or playing back.
q. DEW condensation (see page 58)
Monitors the moisture condensation.
r. Digital zoom (see page 29)
Indicates digital zoom is activating.
s. Snap Shot (see page 44)
Indicates the left time of the Snap Shot Shooting.
t. Playback speed (see page 50)
Indicates the playback speed in PLAYER mode.
SP is not displayed.
u. Zero return (see page 51)
Indicates that the zero return is activating.
v. White Balance mode (see page 45)
Indicates the White Balance mode is activing.
The White Balance modes are AUTO, INDOOR and OUTDOOR.
ENGLISH
13