CaryMart 0020389 Manual

RF Wireless Remote Control Kit (Model 0020389 2S4UB-DC12-ANT2+1CB-8)
The receiver is designed for one-transmitter-many-receivers system. Use an 8 buttons transmitter to control 2 receivers.

Package Include:

2 x Receiver: S4UB-DC09-ANT2 / S4UB-DC12-ANT2 / S4UB-DC24-ANT2 (4 Channel / Four Control Modes)
1 x Transmitter: CB-8
1 x User manual

Feature:

Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship,
offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks,
motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
Wireless control, easy to install.
Relay Output: This receiver is relay output, it can be used to operate both DC and AC equipments. The terminals are NO / NC (normally open /
normally closed), which serves as a switch. That means you should also connect a separate power supply to equipments.
With the magnetic sucker antenna, it can have a further working range.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.

Receiver Parameters:

Model No.: S4UB-DC09-ANT2 / S4UB-DC12-ANT2 / S4UB-DC24-ANT2
Power Supply (Operating Voltage): DC12V±1V (S4UB-DC12-ANT2), DC9V±1V (S4UB-DC09-ANT2), DC24V±1V (S4UB-DC24-ANT2)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Working Frequency: 315MHz / 433MHz
Channel: 4 CH
Control Modes: Toggle, Momentary, Latched, Momentary + Toggle
Static Current: ≤6mA
Maximum Working Current: 10A / each channel
PCB size: 94mm x 76mm x 21mm
Case size: 100mm x 80mm x 28mm
Work with Fixed code transmitters

Transmitter:

Model No.: CB-8
Channel: 8 CH
Remote Control Distance: 1000m / 3000ft (theoretically)
Encode: Fixed code by bonding pad encoded
Unit size: Unit Size: 135mm x 42mm x 25mm
Power Supply: 9V (1 x 6F22 -9V battery, can be used for 12 months)
Matching Transmitters:
The receiver can work with different transmitters, such as model CV-8 (500M), or CB-8 (1000M) etc.

Working Range:

Super long range, with a transmitter (such as CB-8) to form a complete set, the maximum working distance can reach 2000M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will
be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this
maximum working distance.

Magnetic Sucker Antenna:

Frequency Range: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
Cable Length:1.5m, we also can offer longer cable, such as 5meters, 10meters, 30meters.
Anti-interference, waterproof, shielded wire set inside.
Magnetic stand design for easy to install.

Usage:

The receiver can be used to control both DC 0~28V and AC 110~240V equipments.
Notice: The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals B and C are Normally Open; Terminals
A and B are Normally Closed.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com