CaryMart 0020524 Manual

RF Wireless Remote Control Kit (Model 0020524 S1PU-DC12-ANT3+ CB-2N)

Package Include:

1 x Receiver: S1PU-DC06 –ANT3/ S1PU-DC09-ANT3 / S1PU- DC12-ANT3 / S1PU-DC24-ANT3
1 x Transmitter: CB-2N
1 x User manual

Feature:

Application: This type of w i r eless remote control device can use a normally open output devi c e to wirelessl y control another AC or DC device, and it
can be used for synchronous w i r eless control of various home, industrial or agricultural equipments, such as wireless control of the warning host and
the warning horn, w i r eless control of the lights, w i r eless synchronization control of the equipments and so on.
Wireless control, easy to install.
Waterproof: The receiver has waterproof case and waterproof connector, it can be installed outdoors.
Relay Output: This recei v er i s relay output, it can be used to operate both DC and AC equipments. The terminal is NO / NC (normally open / normally
closed), which serves as a sw i t ch. That means you should also connect a separate power suppl y to it.
High Pow er: Each channel can work at maximum current 30A, such as 360W/12V, 180W/6V, 270W/9V, 720W/24V, 3000W/110V, 6000W/220V.
With w ired control terminals: You can connect sensors, limit sw itches, manual sw itches or external devices to control the receiver.
With the external antenna, it can have a further working range.
Design w ith low -power and high-speed CMOS technology.
You can turn on/ off the receiver w ith transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter w hi c h use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.

Receiver Parameters:

Model No. S1PU- DC06 –ANT3/ S1PU- DC09-ANT3 / S1PU-DC12-ANT3 / S1PU-DC24-ANT3
Pow er Supply (Operating Voltage): DC6V (S1PU-DC06-ANT3), DC9V± 1V (S1PU-DC09-ANT3), DC12V± 1V (S1PU-DC12-ANT3), DC24V± 1V
(S1PU- DC24-ANT3)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22-9AWG
Working Frequency: 315MHz
Channel: 1CH
Control Modes: Latched
Static Current: ≤6mA
Maximum Working Current: 30A
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x68mm x 50mm
Work w ith Fixed code transmitters or Learning code transmitters.
External telescopic antenna:
Length of external telescopic antenna: 108mm / 445mm (stretch)
External telescopic antenna use SMA connector.
If you stretches the external telescopic antenna, it can have a further working range, which is twice as much as it used to be.

Transmitter Parameters:

Model No.: CB-2N
With Extended Control Wires
Triggering method: connection and disconnection of t w o wires.
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for a week, i f you want a longer working time, please use a 9V power adapter.)
Operating Current: 10mA
Operating Frequency: 315MHz
Encoding Chip: PT2262 / PT2264 / SC2262
Encoding Type: Fixed code by soldering, up to 6561 codes
If you stretches the telescopic antenna, it can have a further working range, which i s twice as much as it used to be.
It has an on / off button on the side.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 135mm x 42mm x 25mm
The working principle:
Transmitter CB-2N is a special remote control with normally open contact trigger. It has 2 input lines for connecting a variety of devices with normally
open contact output, such as warning host, cable detectors, various sensors, manual sw itches, limit sw itches, Programmable Logic Controllers and
so on. The transmitter can be combined w ith di f ferent types of receivers to form a w ireless control system that can be used to wi r elessly control
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com