Furinno FB19821K Assembly Instructions

x 2

30 min

USEFUL HINTS BEFORE YOU START:

1. Read each step carefully before starting.

2. It is important that each step is performed in correct order

to avoid difficulties.

3. Identify, sort and count the parts before assembly.

4. Assemble the product on packaging cardboard to prevent

scratch or damage.

5. Using uncompatible hardware might cause damage to the

product. DO NOT FULLY-TIGHTEN the nut until all nuts

are ready assembled.

* This unit has been designed to support maximum loads:

TWIN & TWIN XL: 200 lbs, FULL: 400 lbs,

QUEEN: 500 lbs, KING & CAL.KING: 600 lbs

Exceeding these load limits could cause sagging,

instability, product collapse, and/or serious injury.

* Keep all hardware parts out of reach of children.

NEED HELP?

For replacement requests or product inquiries,

please contact our Customer Service Team by emailing us at

support@furinno.com. Thank you for selecting Furinno!

FB19821K20190904

Tool Required

ASSEMBLY INSTRUCTIONS

MODEL: FB19821K

FURINNO BED FRAME

PAGE 1/3

Table of Contents

Do you have a question about the FB19821K and is the answer not in the manual?

Page 1 * Keep all hardware parts out of reach of children. NEED HELP? For replacement requests or product inquiries, MODEL: FB19821K please contact our Customer Service Team by emailing us at support@furinno.com. Thank you for selecting Furinno! FURINNO BED FRAME FB19821K20190904 PAGE 1/3...
Page 2 6/7 6/7 hardware NOTE: Some parts packed inside the zippered compartment at the back of the headboard. SLAT 4PCS SUPPORT LEGS 8PCS with adjustable feet 14PCS M4 X 100mm PAGE 2/3...
Page 3 Back Make sure the cleat is on outside edge. Do not fully tighten screws Do not fully tighten screws until assembly is complete until assembly is complete and the bed is level. and the bed is level. PAGE 3/3...