Playback - Samsung VP-D323 User Manual

Playback

Tape Playback
✤ The playback function works in PLAYER mode only.
Playback on the LCD
✤ It is practical to view a tape using the LCD when in a car or outdoors.
Playback on a TV monitor
✤ To play back a tape, the television must have a compatible colour system.
✤ We recommend that you use the AC Power Adapter as the power source for the camcorder.
Connecting to a TV which has Audio/Video input jacks
1. Connect the camcorder and TV with the Multi-AV cable.
I
The yellow plug : Video
I
The white plug : Audio(L) mono
I
The red plug : Audio(R)
- If you connect to a monaural TV or VCR, connect the
yellow plug (Video) to the video input of the TV or
VCR and the white plug (Audio L) to the audio input
of the TV or VCR.
✤ You may use the SCART adapter (optional).
2. Set the power switch on the camcorder to PLAYER mode.
3. Turn on the TV and set the TV/VIDEO selector on the TV to VIDEO.
I
Refer to the TV or VCR user's manual.
4. Play the tape.
Notes
I
You may use an S-VIDEO (optional) plug to obtain better quality pictures if you have a S-VIDEO
connector on your TV.
I
Even if you use an S-VIDEO (optional) plug, you need to connect an audio cable.
I
If you connect the cable to the Multi-AV jack, you will not hear sound from the Camcorder's
speakers.
Connecting to a TV which has no Audio and Video input jacks
✤ You can connect your camcorder to a TV through a VCR.
1. Connect the camcorder and VCR with the Multi-AV cable.
I
I
I
2. Connect a TV to the VCR.
3. Set the power switch on the camcorder to PLAYER
mode.
4. Turn on both the TV and VCR.
I
Audio input
Video input-
(left)-White
Yellow
I
Audio input
TV
(right)-Red
S-VIDEO input
Camcorder
5. Play the tape.
A/V OUT
Playback
1. Connect a power source and set the power switch
to PLAYER mode.
2. Insert the tape you wish to play back.
3. Using the
find the first position you wish to play back.
4. Press the
I
I
Note
I
The playback mode (SP/LP) is selected automatically.
The yellow plug : Video
The white plug : Audio(L) - Mono
The red plug : Audio(R)
Set the input selector on the VCR to LINE.
Select the channel reserved for your VCR on the TV set.
(FF) and (REW) buttons,
(PLAY/STILL) button.
The images you recorded will appear on the TV after a few seconds.
If a tape reaches its end while being played back, the tape will rewind
automatically.
VIDEO
AUDIO(L)
VCR
AUDIO(R)
S-VIDEO
TV A/V OUT
CAMCORDER
ANTENNA
7