Toshiba MMY-MUP0721HT6P-UL Owner's Manual page 15

■
Louver setting
(Selecting the type of swing or fixing the louvers)
NOTE
This function may not be available, depending on the model of the indoor unit.
Swing type
You can select from 3 types of swing operation: "Standard", "Dual", or "Cycle".
NOTE
• For models that "Louver setting" is not available, the message "No function" is displayed.
• Push [ Return] to not fi x the changes, so conditions are as before changes, and return to the "Louver setting"
screen.
• For group connections, refer to the Owner's Manual for the wired remote control.
27-EN
1140602001_EN FR ES.indb 14 1140602001_EN FR ES.indb 14
1
In "Menu", select "Louver setting", and
push [ Set/Fix]
2
Push [ ] and [ ] to select "Swing
type", and then push [ Set/Fix]
3
In the "Swing type" screen, push [ ] and
[ ] to select a mode
Regarding "Swing type", refer to the Installation
Manual of the indoor unit.
4
Push [ Set/Fix]
Return to the "Louver setting" screen.
5
Push [ Return]
" " is displayed.
When doing group connections, the screen for
selecting units is displayed, so push [ Return]
to display " " .
Louver lock (Fixing the angle of the louvers)
You can set and fix the angle of louvers individually for each air outlet.
NOTE
• For models that "Louver setting" is not available, the message "No function" is displayed.
• Push [ Return] to not fi x the changes, so conditions are as before changes, and return to the "Louver setting"
screen.
• To cancel "Louver lock", push [ ] and [
• When the operation mode is "Cool" or "Dry", performing "Louver lock" at position (4) or (5) may cause
condensation.
• For group connections, refer to the Owner's Manual for the wired remote control.
• " " is displayed when "Louver lock" is set.
– 14 –
1
In "Menu", select "Louver setting", and
push [ Set/Fix]
2
Push [ ] and [ ] to select "Louver
lock", and then push [ Set/Fix]
3
Push [ ] and [ ] to select louvers
Louver 1 Louver 2 Louver 3 Louver 4
For louver numbers of each indoor unit, refer to
<Individual louver (Select wind direction for each
air outlet)>.
4
Push [ ] and [ ] to select a louver
angle (wind direction)
Push [ ] to raise a louver and push [
lower a louver.
(1) (2) (3) (4) (5)
5
Push [ Set/Fix]
Return to the "Louver setting" screen.
6
Push [ Return]
" " is displayed.
When doing group connections, the screen for
selecting units is displayed, so push [
to display " " .
] to set louver not locked for the louver angle of each louver.
All louvers
] to
Louver not
locked
Return]
EN
FR
ES
28-EN
4/22/23 4:50 PM 4/22/23 4:50 PM