Related Manuals for SystemAir FFR 100
Summary of Contents for SystemAir FFR 100
- Page 1 Installation, Operation and Maintenance instruction Filter cassette for circular, rectangular and square ducts...
-
Page 2: Table Of Contents
Table of content 1 Introduction ............1 Product description ........1 Intended use ..........1 Document description........1 Product overview FFK and FFS ...... 1 Product overview FFR and FGR ..... 1 Product liability..........2 2 Safety ..............2 Safety definitions ......... 2 Safety instructions ........ -
Page 3: Introduction
FGR and FFR has circular connections with done by approved personnel only. rubber sealing. Speak to Systemair for more information on how to install the FFK has rectangular connection and FFS has square product in different installation locations. -
Page 4: Product Liability
Name plate Connections for a pressure sensor Product liability Safety Systemair is not liable for damages that the product causes Safety definitions in these conditions: • The product is incorrectly installed, operated or Warnings, cautions and notes are used to point out specially maintained. -
Page 5: Personal Protective Equipment
Personal protective Transportation and equipment storage Use personal protective equipment during all work on the product. Caution • Approved eye protection Make sure that the product does not become damaged or wet during • Approved protective helmet transportation. • Approved hearing protection •... -
Page 6: Installation
Installation steps: Use guide rails to attach the duct to the product. To do before installation of Guide rails are not supplied by Systemair. the product • Use installation material with fire resistance rating for the installation location. • Examine the packaging for transportation damage and re- move the packaging from the product carefully. -
Page 7: Technical Data
Technical data Product dimensions FGR Filter installation (1) for FGR. ø Free area for filter change. -
Page 8: Product Dimensions Ffr
Product dimensions FFR Note: Install the filter cassette in flat or vertical position. If installed vertically, the direction of the airflow must be in the direction down so that the filter bags do not collapse. Free area for filter change... -
Page 9: Product Dimensions Ffk
Product dimensions FFK Note: Install the filter cassette in flat or vertical position. If installed vertically, the direction of the airflow must be in the direction down so that the filter bags do not collapse. c/c E c/c F 30–15 40–20 50–25 50–30... -
Page 10: Product Dimensions Ffs
Product dimensions FFS Note: Install the filter cassette in flat or vertical position. If installed vertically, the direction of the airflow must be in the direction down so that the filter bags do not collapse. � � A � � B c/c D Free area for filter change... -
Page 11: Maintenance
Push the new filter into position. Make sure that the filter is in the correct direction. Close and lock the hatch. 6.1.1 Filter class Product Coarse 50% Coarse 60% Coarse 70% ePM1 60% ePM10 55% Panel filter For other filter classes available, refer to www.systemair.com... - Page 12 © Copyright Systemair AB All rights reserved Systemair AB reserves the rights to alter their products without notice. This also applies to products already ordered, as long as it does not affect the previously agreed specifications. Document in original language...
Need help?
Do you have a question about the FFR 100 and is the answer not in the manual?
Questions and answers