Removing The Bottom Packaging Material - Canon imagePROGRAF TZ-5300 Installation Manual

5

Removing the Bottom Packaging Material

1
Have 4 people grasp the carrying grips on the right side
of the printer and gently lift up the right side. Remove the
bottom packaging material in the direction of the arrow.
②
①
②
③
④
Gently support the front face
with your left hand.
Caution
● Lifting the printer requires at least 4 people. Take care when
handling the printer as it is very heavy.
● Check that all four casters are locked.
③ ④
①
②
③
④
2
Have 4 people grasp the carrying grips on the left side
of the printer and gently lift up the left side. Remove the
bottom packaging material in the direction of the arrow.
❷
❶
①
Important
● Dispose of the removed bottom packaging material in
accordance with the regulations of your local government.
4
❹
❶
❸
❷
❸
❹
Gently support the front face
with your right hand.
❶
❷
❸
❹