Camera Set - Samsung SCZ-2430 User Manual

setup

CAmERA SET

You can configure the general settings of the camera module.
Select <mAIN mENU> - <CAmERA SET>.
1.
The Camera Setup menu appears.
2. Change the settings as necessary, or select
an item to check.
CAmERA ID
Provide the ID and location for a camera that displays on the screen.
Select <CAmERA SET> - <CAmERA ID>.
1.
2. Use
then press [ENTER].
In the lower input box of the screen, the
selected character will be entered.

3. When done, press [ENTER].
The camera ID will be displayed in the specified position.
vPS
If you set it to <ON>, the camera images will be displayed in progressive mode.
M
1_ setup
Z-2430P(D)-3430P(D)-ENG.indd 18
_+ to select a desired character,
▲▼
You can enter up to 54 characters including
alphabets, numbers and special characters.
LOCATION : Specify the display position
of the camera ID.
VPS is only available for SCZ-3430PD/SCZ-3430ND and SCZ-3430P/SCZ-3430N.
CAMERA SET
 
CAMERA ID
VPS
IRIS
MOTION (F.FAST) ---
DNR
SHUTTER
SENS-UP
FLICKERLESS
XDR
ABCDEFGHIJKLMNOPQRSTUVWXYZO
123456789 : ? _ +
()/

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
OFF
OFF
ALC
MID
(OFF) ---
AUTO X4
OFF
MID
2010-5-26 16:42:2