Samsung SCC-C7433(P) User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCC-C7433(P)
  6. User manual
Samsung SCC-C7433(P) User Manual

Samsung SCC-C7433(P) User Manual

Outdoor type smartdome camera
Hide thumbs Also See for SCC-C7433(P):
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
User's Guide
SmartDome Camera (Outdoor type)
SCC-C7433(P)/C7435(P)
-C7435-NA_Cover-01.indd 1
2008-05-20 오전 1

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCC-C7433(P)

Summary of Contents for Samsung SCC-C7433(P)

  • Page 1 User’s Guide SmartDome Camera (Outdoor type) SCC-C7433(P)/C7435(P) -C7435-NA_Cover-01.indd 1 2008-05-20 오전 1...

  • Page 2: Safety Precautions

    If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10. When cleaning, do not spray water directly onto parts of the product.

  • Page 3: Fcc Statement

    CAUTION Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. Do not install in a location subject to high temperature (over 140°F), low temperature (below -49°F), or high °F), or high F), or high humidity.

  • Page 4: Important Safety Instructions

    Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers)

  • Page 5: Table Of Contents

    Contents Overview ... 7 About this guide ...7 Product overview ...7 Main features ...7 Components ...7 CHECKING COMPONENTS IN THE PACKAGE ...7 NAMES OF EACH PART ...8 Installation ... 9 Before installation ...9 THINGS TO KEEP IN MIND DURING INSTALLATION AND USE ...9 Initial setting ...0 CAMERA ADDRESS SETUP ...10 SETTING COMMUNICATION PROTOCOL ...10...
  • Page 6 DIGITAL ZOOM ...41 DISPLAY ZOOM ...42 DISPLAY P/T ...43 EXIT ...43 Video set ... IRIS ...44 ALC ...44 SHUTTER ...47 AGC...48 MOTION ...49 WHITE BAL ...50 FOCUS MODE ...51 SPECIAL ...52 EXIT ...54 Preset ... Zone set ...7 PRIVACY ZONE ...57 ZONE DIR SET ...58 ZONE AREA SET ...59 Auto set ...6...
  • Page 7 AUTO SET ...68 AUX OUT CONTROL ...68 Other set ...69 PROPORTIONAL P/T ...69 TURBO P/T ...69 AUTO CAL ...69 D-FLIP ...70 CAM RESET ...70 LANGUAGE ...70 PASSWORD ...71 RS-485 ...72 Clock set ...7 System info ...7 Shortcut keys ...7 Product Specifications ...77 2008-05-20오전1...

  • Page 8: Overview

    Overview About this guide ❚ This user guide includes basic instructions for the product. It is recommended that all users read this guide before use. This guide is divided as follows:  “Overview” introduces the user guide and product related information.  “Installation”...

  • Page 9: Names Of Each Part

    NAMES OF EACH PART Your camera has the following components: . Cover Front . Cover Rear . Camera Body . Cover-dome . Alarm Output: N/O, COM, N/C, AO-2, AO-1, GND 6. Alarm Input (~): AI-8, AI-7, AI-6, AI-5,GND, AI-4, AI-�, AI-2, AI-1, GND 7.

  • Page 10: Installation

    Installation Before installation ❚ THINGS TO KEEP IN MIND DURING INSTALLATION AND USE • Do not disassemble the camera on your own. • Always be careful when handling the camera. Do not strike the camera by your fists or shake it.

  • Page 11: Camera Address Setup

    SETTING COMMUNICATION PROTOCOL Use number 1~4 PIN of SW901 to set communication Protocol. PIN PIN PIN Comp A : SAMSUNG HALF B : SAMSUNG FULL PIN SW903 (x10) SW902 (x100) SW901 <Top side of the Housing> SW904 (x1) TERMINATION SW905...

  • Page 12: Baud Rate Setting

    BAUD RATE SETTING Use PIN 5 and 6 of SW901. BAUD RATE 4800 BPS 9600 BPS 19200 BPS 38400 BPS The factory default setting is set to 9600BPS. PIN 5 PIN 6 2008-05-20오전1...

  • Page 13: Setting Rs-422A/Rs-485 Termination

    SETTING RS-A/RS- TERMINATION As it is shown in the structure map, when Controller and RS-422A/RS-485 is connected, it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest.
  • Page 14 Controller Division CAM  <RS-A/RS- Full Duplex Organization> Note A communication error may occur if you connect multiple cameras that are assigned the same address in the network. n <  CAM  CAM n- CAM n Division SW-ON SW-ON 2008-05-20오전1...

  • Page 15: Preparing The Cable To Connect To The Smartdome

    Preparing the cable to connect to the SMARTDOME See the wiring diagram of the Holder Housing and prepare cables for the SMARTDOME. (Power adaptor: 24V AC, �.0A) <Wiring Diagram of the Holder Housing> -C7433_7435-Eng.indd14 2008-05-20오전1...
  • Page 16 HOLDER HOUSING <Holder Housing> -C7433_7435-Eng.indd15 2008-05-20오전1...

  • Page 17: Note: Connector Arrangement Of The Camera Adaptor Board

    Note: Connector arrangement of the camera adaptor board ❚ SCC-C7(P) Adapter Board 2008-05-20오전1...

  • Page 18: Cable Connection

    Cable connection ❚ . First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT). . Then, connect the other end of the connector to the Video Input Terminal of the monitor. Video terminal on the rear of monitor BNC Cable 2008-05-20오전1...
  • Page 19 . Connect the Power Adapter to the Power Cable of the camera. . Adjust the switch on the Power Adapter to the proper voltage. Then, connect the Power Adapter's plug to the Power Connector. (Power adaptor: 24V AC, �.0A) Power Selection Switch under the Power Adaptor Power Selection Switch under the Power Adaptor...
  • Page 20 . Connect the Remote Control Terminal of the camera and the external Controller. Adapter Cable Controller -C7433_7435-Eng.indd19 2008-05-20오전1...

  • Page 21: Separately Sold Products For Installation

    Separately sold products for installation ❚ Depending on the installation site, it may be convenient to use one of the following products. . WALL MOUNT ADAPTOR (SADT-0WM) This adaptor is used for installing the SMARTDOME(SCC-C74��(P)/C74�5(P)) camera on an outdoor wall. C74�5(P)) camera on ) camera on 2008-05-20오전1...
  • Page 22 . CEILING MOUNT ADAPTOR (SADT-00CM) This adaptor is used for installing the SMARTDOME(SCC-C74��(P)/C74�5(P)) for the SmartDome camera to a concrete ceiling. . POLE MOUNT ADAPTOR (SADT-00PM) This adaptor is used for installing the WALL MOUNT ADAPTOR (SADT-10�WM) to a pole that is over 8 cm (2.76 in.) in diameter.
  • Page 23 . CORNER MOUNT ADAPTOR (SADT-0CM) This adaptor is used for installing the WALL MOUNT ADAPTOR (SADT-10�WM) to the edge of wall. -C7433_7435-Eng.indd22 2008-05-20오전1...

  • Page 24: Installation Precautions

    Installation precautions ❚ . Make sure that the installation site can sufficiently support a minimum of four times the net weight of the SCC-C74��(P)/C74�5(P) SmartDome camera and other accessories. C74��(P)/C74�5(P) SmartDome camera and other accessories. (P)/C74�5(P) SmartDome camera and other accessories. C74�5(P) SmartDome camera and other accessories.
  • Page 25 . Prepare the Holder Housing part. Refer to the wiring diagram below to connect the external cables and the cables of the Holder Housing. A. Remove one of the connectors connected to the cable end of the Holder Housing. B. Peel off the coating of the cable and connect it to the external cable using soldering/ (See page 17 in the installation guide to Connect the cables.) C.
  • Page 26 . Push the connected cables into the inside of the Rod Coupling. At the same time, insert the Holder Housing into the Rod Coupling while fitting the Guide of the Holder Housing into the Guide Hole of the Rod Coupling. Then, turn the Holder Housing clockwise by approximately 18 degrees.
  • Page 27 . Hook up the Safety Wire Ring at the end of the Safety Wire on the Housing to the Safe Wire Rack of the Holder Housing. Note During installation or detachment, to avoid safety accident and ‘HOUSING’ damage due to the fall, make sure the safety tis secured to the ‘HOLDER HOUSING’.
  • Page 28 . Align the SAMSUNG logo on the Housing and the FRONT label of the Holder Housing so that they face the same direction, and insert the � Guides of the Housing into the Guide Hole of the Holder Housing. Turn the Housing counter clockwise by approximately 20 degrees.
  • Page 29 6. Couple the Cover Front with the Cover Rear. In th next step, align the Arrow mark on the Cover Rear to face the START label on the Housing. Install these two parts into the Housing while aligning the Guide Hole of these parts with the Guide of the Holder Housing.
  • Page 30 ※ Follow the steps below to fasten the SMARTDOME (SCC-C74��(P)/C74�5(P)) with the Wall Mount Adaptor (SADT-10�WM). A. Refer to the Installation Guide of the Wall Mount Adaptor (SADT-10�WM) to secure the Holder Housing to the Wall Mount Adaptor as shown in PIC 1. B.

  • Page 31: Camera Setup

    Camera Setup CAMERA SET ... CAMERA ID V-SYNC DAY/NIGHT MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT VIDEO SET... IRIS SHUTTER MOTION WHITE BAL FOCUS MODE SPECIAL EXIT Note *SCC-C74��(P) does not support for WDR function. OFF/ON... INT/LINE..
  • Page 32 PRESET PRESET MAP ZONE SET... PRIVACY ZONE ZONE DIR SET ZONE AREA SET EXIT AUTO SET... AUTO PAN PATTERN SCAN AUTO PLAY ALARM SET... ALARM PRIORITY SET... ALARM IN SET... ALARM OUT SET... AUTO SET... 0~127 OFF/ON... OFF/ON... OFF/ON... QUIT/SAVE 1/2/�/4 1/2/�...
  • Page 33 AUX OUT CONTROL... OTHER SET... PROPORTIONAL P/T TURBO P/T AUTO CAL. D-FLIP CAM RESET LANGUAGE* PASSWORD RS-485 EXIT CLOCK SET... DISPLAY TIME FORMAT SET TIME DATE FORMAT SET DATE EXIT SYSTEM INFO... Note *Selectable languages may vary depending on sales region. OUT1 OFF/ON OUT2...
  • Page 34 Note - If the power is turned off after PRESET, AUTO PAN, SCAN, PATTERN function is activated and no other control is made, camera will do the same function after the power is turned on. - When tilt position is over 90° and menu-on command is received, pan will automatically rotate 180° and tilt will be move to the corresponding position.

  • Page 35: Camera Set

    Camera setup ❚ CAMERA ID This CAMERA ID menu is used to assign a camera ID to this camera. If you press the Setup switch when the CAMERA ID menu is selected, the corresponding setup screen appears. (CAMERA SET) CAMERA ID ON...

  • Page 36: Day/Night

    (CAMERA SET) CAMERA ID V-SYNC LINE... DAY/NIGHT DAY... MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT QUIT Select LINE and press Enter. You will see the LINE LOCK submenu where you can adjust the phase of the LINE LOCK. You can use the PHASE menu of the LINE LOCK submenu to assign as much PHASE as you want.
  • Page 37 DAY... If you press the ENTER when the DAY… submenu is selected, the corresponding screen appears. You can set the values for [C-GAIN] when the DAY… submenu is selected. You can set the values for [AGC COLOR] and [AGC DETAIL] while the AGC menu is selected. (DAY) C-GAIN AGC COLOR...
  • Page 38 (BW) BURST Even in night mode, you can see color images in bright illumination. Therefore you can select any of [COLOR…] and [BW…]. In case of [COLOR…], you have to set the color temperature for white balance. You can also specify the settings for red and blue colors on your own. In case of [BW...], the burst signals are output with the BW Composite Video signals when the BURST is set to [ON].

  • Page 39: Motion Det

    (AUTO) LEVEL DAY  NIGHT NIGHT  DAY For this function, you can specify the level for each conversion between Day and Night. Note When the DAY/NIGHT is set to [AUTO...], the AGC is displayed with “---“ so you cannot change its setting. MOTION DET The MOTION DET menu is used to configure the motion detection related settings.
  • Page 40 Those 3 types are like the following: . Window Type The selected area is displayed with a box. The motion can be detected for the area only. You can manually set the motion detection area. You can use the UP/DOWN/LEFT/RIGHT Setup switch to set the size.
  • Page 41 . Block Type The screen displays with small blocks. When a motion is detected in the selected blocks, the small blocks are displayed on the screen. [PRESET] : The whole screen becomes the motion detection area. [USER...] : You can manually set the motion detection area. Use the UP/DOWN/LEFT/RIGHT, ENTER to set the area.

  • Page 42: Zoom Speed

    ZOOM SPEED In the ZOOM SPEED, menu you can select the speed of the ZOOM Key (Tele/Wide). (CAMERA SET) CAMERA ID V-SYNC DAY/NIGHT MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT Use the Left/Right key in the ZOOM SPEED menu to select the speed. 1: Slowest speed 2: Low speed 3: High speed...

  • Page 43: Display Zoom

    (CAMERA SET) CAMERA ID V-SYNC DAY/NIGHT DAY... MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT QUIT DISPLAY ZOOM In DISPLAY ZOOM, you can display the ZOOM scale on the screen. (CAMERA SET) CAMERA ID V-SYNC DAY/NIGHT DAY... MOTION DET ZOOM SPEED DIGITAL ZOOM...

  • Page 44: Display P/T

    DISPLAY P/T In DISPLAY P/T, you can display the position of Pan/Tilt on the screen. (CAMERA SET) CAMERA ID V-SYNC DAY/NIGHT DAY... MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT QUIT Note - If no change on the Pan/Tilt position is made for � seconds, the information window will disappear. - It allows an error range of ±...

  • Page 45: Video Set

    Video set ❚ IRIS There is a function to automatically adjust IRIS to the incoming light level. Owing to this function, you may set up the brightness level yourself. The ALC(Auto Light Control) menu allows you for video output level setup. The WDR(Wide Dynamic Range) menu allows you for setting up the level of WDR.
  • Page 46 (ALC) BOTTOM... ( 0) - - - - I - - - - LEVEL For items in the BLC menu, the user can set the area and location of the BLC area by pressing ENTER key after put the cursor on [USER…] using the Left, Right key. For AREA items, you can use the Up, Down, Left, Right key to designate the AREA, and then press the ENTER key.
  • Page 47 (BLC) <SIZE> <LOCATION>... Use Left, Right key in the LEVEL menu to control the video output level (brightness). MANU When you press the ENTER key after selecting MANU in the IRIS item, an additional screen appears in which you can set manually opening or closing the IRIS. (VIDEO SET) IRIS MANU...

  • Page 48: Shutter

    The WDR camera is a state-of-art technology to expand the screen profit, mostly effective when you photograph both indoor and outdoor. In short, this function provides you with the distinct reproduction of not only the indoor but also the outdoor. Press the ENTER to set up the WDR level.

  • Page 49: Agc

    (VIDEO SET) IRIS SHUTTER WHITE BAL FOCUS MODE SPECIAL EXIT Keep pressing both Left and Right in the SHUTTER menu, the speed will change in the following sequence. OFF → AUTO X2 → AUTO X4 → AUTO X6 → AUTO X8 → AUTO X12 → AUTOX16 → AUTO X24 →...

  • Page 50: Motion

    (VIDEO SET) IRIS SHUTTER WHITE BAL FOCUS MODE SPECIAL EXIT Note When the COLOR/BW menu of the camera set is set to [AUTO...], AGC will be displayed as “---“. You can’t adjust the settings manually. MOTION The MOTION function is available only when the SHUTTER menu is set to Slow Shutter AUTO, being composed of 5 steps, [S.SLOW], [SLOW], [NORM], [FAST], [F.FAST].

  • Page 51: White Bal

    WHITE BAL Lights are generally denoted as color temperatures and expressed in Kelvin (K) units. The general light color temperatures are shown below. 10000K Blue sky 9000K 8000K 7000K 6000K 5000K 4000K 3000K 2000K 1000K You can select one of four modes for white balance adjustment as follows: - ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is monitored continuously and thereby white balance is set automatically.

  • Page 52: Focus Mode

    - MANU : If WHITE BAL menu is set to MANU mode, the user can set the white Balance considering the current illumination. Select MANU menu and press the ENTER, the sub screen where you can select Manual White Balance will be shown. Use the left/right keys to select �200K, 5600K or OFF(USER) mode in the PRESET menu.

  • Page 53: Special

    (VIDEO SET) IRIS SHUTTER WHITE BAL FOCUS MODE SPECIAL EXIT Note ※ AF function may not possible with types of objects listed below. For such objects, focus manually. - High intensity objects or objects illuminated with low lighting - Objects shot through wet or dirty glass - Pictures that are a mixture of distant and nearby objects - White walls and other single-color objects - Venetian blinds and other horizontally striped objects...
  • Page 54 DNR(Digital Noise Reduction) function enables the picture to be reduced noise. (SPECIAL) FLICKERLESS REVERSE DETAIL Y-LEVEL C-LEVEL POSI/NEGA FLICKERLESS When this is set to [ON], the shutter speed is set to 1/100 sec (for NTSC) or 1/120 sec (for PAL) to prevent from flickering by the discordance between vertical synchronization frequency and on-and-off frequency of the light.

  • Page 55: Exit

    C-LEVEL It is used to set the levels for the Burst signal and the entire color signal of the video signal. POSI/NEGA It is used to output as it is, or mirror the video brightness signal. EXIT The EXIT menu is used to return to the MAIN menu. - QUIT : Ignores the changed information and restores the saved information.

  • Page 56: Preset

    Preset ❚ This is the menu that user sets the PAN/TILT location, Zoom/Focus, and screen condition, so the camera can monitor the presetting area on demand. A total of 128 presets are available. ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET...
  • Page 57 POSITION SET From “POSITION SET...” press the ENTER key to get into the PAN/TILT, FOCUS/ZOOM SET screen to set the PAN/TILT location and FOCUS/ZOOM condition then press the ENTER key to return to a upper menu. PRESET ID This is the ID set up function for each PRESET. It can be set up to 12 characters using the left, right, up, and down keys.

  • Page 58: Zone Set

    Zone set ❚ ■ The ZONE SET menu includes the setup of PRIVACY ZONE, ZONE DIR SET, and ZONE AREA SET. ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... CLOCK SET... SYSTEM INFO...

  • Page 59: Zone Dir Set

    Note ※ For the safer privacy protection, select about 10 % more than the actual area to hide when you set up the PRIVACY ZONE area. ※ The mosaic of the recorded images is set to be the PRIVACY ZONE. The mosaic of the recorded images can not be recovered after recording.

  • Page 60: Zone Area Set

    ZONE AREA SET Press the ENTER key to enter the ZONE AREA MAP screen from “ZONE AREA SET...”. Select a ZONE AREA number from the ZONE AREA MAP screen and press the ENTER key to enter the ZONE AREA setup screen. (ZONE SET) PRIVACY ZONE ZONE DIR SET...
  • Page 61 LOCATION The [LOCATION...] menu designates the left/right LIMIT positions of ZONE AREA. Enter the setup screen to move PAN, then select a start position and press the ENTER key. Move PAN again to select an end position and press the ENTER key. Now, ZONE AREA setup is complete. ZONE AREA SET0 LOCATION ZONE ID SET...
  • Page 62 ZONE ID SET This function is used to allocate as many as 12 IDs to each zone area. Use Left/Right/ UP/DOWN for this purpose. You may select the ID position from the additional menu of [LOCATION...]. ZONE AREA SET0 LOCATION ZONE ID SET ZONE ENABLE EXIT...

  • Page 63: Auto Set

    Auto set ❚ The AUTO SET menu includes AUTO PAN, PATTERN, and SCAN and it is able to set up the AUTO PLAY motion. AUTO PAN After selecting the locations of two points (PAN/TILT) of START and END, it loops continuously in the set up SPEED.
  • Page 64 POSITION SET The menu [POSITION SET …] sets the Start / End position of AUTO PAN. Return to the settings screen and set the desired START position for PAN/TILT, and then press the ENTER key. And, set the END position for the PAN/TILT. Press the ENTER key to finish the setup for AUTO PAN Start/End positions.

  • Page 65: Pattern

    PATTERN This is a replay function so that the MANUAL functions such as PAN, TILT, ZOOM, and FOCUS are played for 2 minutes. Note - When the PATTERN is saved/executed, the PAN/TILT is operated with PROPORTIONAL ON, TURBO OFF. - If the SSC-1000 or SSC-2000 is used when uploading/downloading the menu setup, reset the PATTERN because it may be different with the first setting.

  • Page 66: Scan

    PATTERN can be set up to �. Choose 1, 2, or � with the Left/Right key in the [PATTERN SET] and press the ENTER key to get into the PATTERN set up screen. From the moment “PATTERN SET 1” is gone for 2 minutes, it memorizes the MANUAL movements and after 2 minutes, it will return to a upper menu.

  • Page 67: Auto Play

    AUTO PLAY If you press the ENTER switch when the [1…] submenu is selected, the corresponding screen appears. (AUTO SET) AUTO PAN PATTERN SCAN AUTO PLAY 1... QUIT AUTO RETURN This menu sets up the time during which AUTO PLAY repeats. AUTO PLAY This function sets up the motion which will be repeatedly performed by the camera whenever the time set by AUTO RETURN elapses.

  • Page 68: Alarm Set

    If you press the ENTER switch when the [2…] submenu is selected, the corresponding screen appears. (AUTO SET) AUTO PAN PATTERN SCAN AUTO PLAY 2... QUIT Set the start/end time and select PRESET, PATTERN, AUTO PAN or SCAN to set up. Preset function will be in action according to the start time.

  • Page 69: Alarm Priority Set

    ALARM PRIORITY SET This sets the priority of the 8 ALARM inputs so ALARM can work corresponding to the priority. The priority of the DEFAULT is ALARM1, ALARM2, ALARM�, ALARM4, ALARM5, ALARM6, ALARM7, ALARM8. If the ALARM is working at the same time and the priority is the same, it will operate according to the DEFAULT priority.

  • Page 70: Other Set

    Other set ❚ ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... CLOCK SET... SYSTEM INFO... PROPORTIONAL P/T This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual operation of PAN/TILT.

  • Page 71: D-Flip

    D-FLIP When D-FLIP is off, TILT movement ranges from 0° to 90°. When D-FLIP is on, TILT movement ranges from 0° to 180°. When D-FLIP is on, images mirror vertically and horizontally in the area beyond TILT 90°. CAM RESET CAM RESET clears all the settings made so far and restores the factory default settings.

  • Page 72: Password

    PASSWORD This function selects or cancels the MENU setup password. Press the ENTER key at the state of PASSWORD ON, and the following screen will appear for password setup. (OTHER SET) PROPORTIONAL P/T OFF TURBO P/T AUTO CAL. D-FLIP CAM RESET LANGUAGE ENGLISH PASSWORD...

  • Page 73: Rs-485

     TIME FORMAT : Supports 2 type of formats: 24 Hours and 12 Hours (AM/PM).  SET TIME : Sets the time.  DATE FORMAT : Supports � types of formats: YYYY/MM/DD, DD/MM/YYYY, and MM/DD/YYYY.  SET DATE : Sets the date. (RS-485) PRIORITY PROTOCOL SAMSUNG HALF BAUD RATE 9600 ADDRESS 24HOUR 00:04:00...

  • Page 74: System Info

    INFO... * ALARM, MOTOR, CAMERA and EEPROM VER. may change without notice. (SYSTEM INFO) ALARM VER. 1.000 MOTOR VER. 1.000 CAMERA VER. 1.000 EEPROM VER. 1.000 PROTOCOL SAMSUNG COMM. TYPE RS-485, HALF BAUD RATE 9600 ADDRESS SERIAL NO. 000000000000000 2008-05-20오전1...

  • Page 75: Shortcut Keys

    Shortcut keys ❚ SSC-1000 or SSC-2000 Controller supports the following short keys. Function CAMERA SET… DAY/NIGHT - DAY DAY/NIGHT - NIGHT DAY/NIGHT - AUTO VIDEO SET… IRIS - WDR IRIS - ALC FOCUS MODE - ONEAF FOUCS MODE - MF FOUCS MODE - AF ALARM SET…...
  • Page 76 Function AUTO RETURN *1) AUTO Calibration CAM RESET Other keys than AUTO CAL. and AUTO RETURN, upon execution, shall be applied to the MENU setup process. *1) The use of AUTO RETURN will be available only when the function equivalent to AUTO PLAY, a sub menu of AUTO SET has been built in.
  • Page 77 SCC-C7(P)/C7(P) Ø168 Ø235 Ø258 -C7433_7435-Eng.indd76 2008-05-20오전1...

  • Page 78: Product Specifications

    Product Specifications Item Product Type Zoom lens single body WDR SmartDome CAMERA SCC-C74��/C74�5 : AC 24V ± 10% (60Hz ± 0.�Hz) Power Input SCC-C74��P/C74�5P : AC 24V ± 10% (50Hz ± 0.�Hz) Heater SCC-C74�� : 24W(Camera only), 55W(With Fan & Heater) Power Consumption SCC-C74�5 : 25W(Camera only), 55W(With Fan &...
  • Page 79 Item Condition Illumination 50IRE 30IRE Min. Scene illumination 15IRE 50IRE 30IRE 15IRE SCC-C74�� : N/A SCC-C7435 : x128 SCC-C7435P : x160 Signal Output COMPOSITE VIDEO OUT : 1.0 Vp-p 75 ohms/BNC One body; 32x Zoom lens Lens Focal length : 3.55 to 113 mm Aperture PAN range PAN Function...
  • Page 80 Item Operation Temperature -49�F ~ +122�F Operation Humidity ~90% DOME : 168(ø), SIZE Outline : 258(ø) x 422(H) Weight NET : 5.95 Kg Lives of Main Parts Slip-ring: Rotated 10,000,000 times Details 2008-05-20오전1...
  • Page 81 Memo _SCC-C7435-JAP.indd.indd 81 5/19/2008 12:03:44 P...
  • Page 82 _SCC-C7435-JAP.indd.indd 82 5/19/2008 12:03:44 P...

This manual is also suitable for:

Scc-c7435pScc-c7433Scc-c7435

Table of Contents