Power Zoom Camera User Manual Z-2430P(D)-3430P(D)-ENG.indd 1 SCZ-2430P/SCZ-2430N/SCZ-2430PD SCZ-3430P/SCZ-3430N/SCZ-3430PD 2010-5-26 16:42:1...
Page 2
overview CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or ...
Page 3
Continued use in such a condition may cause fire or electric shock. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
Page 4
overview FCC STATEmENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.
ImPORTANT SAFETy INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.
overview CONTENTS INSTALLATION & _ overview Z-2430P(D)-3430P(D)-ENG.indd 6 OvERvIEW CONNECTION SETUP APPENDIx Important Safety Instructions Contents Features What’s Included At a Glance Preparing Installation Connecting the Cables Main Menu Profile Camera Set Intelligent Video Privacy Zone Preset Other Set Communication System Info Shortcut Keys Specifications...
FEATURES With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implemented. High Sensitivity: It implements images of high sensitivity using the up-to-date Super-HAD IT CCD(SCZ-2430P/SCZ-2430N/SCZ-2430PD/SCZ-2430ND)/ExView- HAD PS CCD(SCZ-3430P/SCZ-3430N/SCZ-3430PD/SCZ-3430ND). VPS(Virtual Progressive Scan): This is an advanced technology that reproduces ...
overview WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Camera AT A GLANCE SIDE vIEW Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol.
� � Rear Panel � � � � � � � � � � Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. SCZ-3430PD/SCZ-3430ND Z-2430P(D)-3430P(D)-ENG.indd 9 � � � SCZ-2430P/2430N �...
Page 10
overview 1. ALARM OUT Alarm out jack for motion detection. (Open Collector, On Gnd) 2. GND Grounding jack. 3. TRIGGER IN ( Displays the current still image when it receives the Trigger signal. (Normal Open Type) 4.5.6 FOCUS, COM, ZOOM This port is used for ZOOM/FOCUS, MENU CONTROL, HOME RETURN, and ONEAF by using an external controller.
Page 11
* 2 : For short voltage supply during MENU OFF, executes ONEAF and for more than 2 second * 3 : For more than 2 second long voltage supply, moves to the PRESET 0(HOME) position. 7. 5V OUT Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA. 8.
installation & connection PREPARING INSTALLATION To install and use the camera, first prepare the following cables. Power Adapter Cable (sold separately) The requirements for the power adapter, which connects to the camera’s POWER IN terminal, are as follows: - SCZ-2430PD/SCZ-2430ND/SCZ-3430PD/SCZ-3430ND : DC 12V 600mA - SCZ-2430P/SCZ-2430N/SCZ-3430P/SCZ-3430N: AC 24V 300mA video Cable(sold separately)
Page 13
BNC cable(not included) 3. Plug in the power adapter(not inlcluded). Use a “minus” screwdriver to connect one part of the power adapter, which consists of two lines, to the POWER terminal of the camera as follows : Z-2430P(D)-3430P(D)-ENG.indd 13 Video In Terminal of Monitor Rear Surface Video Out Terminal 1.
Page 14
- Signaling Speed: 9600 bps - Data Bit : 8 bits - Stop Bit : 1 bit - Parity Bit : none 1_ installation & connection Z-2430P(D)-3430P(D)-ENG.indd 14 TYPE 4_43ZOM_WDR_N PROTOCOL SAMSUNG-E ADDRESS COMM.TYPE RS485,HALF BAUD RATE 9600 CAMERA VER. V2.00_100000 LENS...
setup Using OSD icons _+: If these icons appear in the left and right corner of a menu item, you can use them move to the previous or next menu. (EXIT): Exits the menu setup screen. (RET): Saves your settings and returns to the previous screen. ...
setup COmmUNICATION Configures the settings pertaining to RS-485 communication. SySTEm INFO Shows the system information such as the camera version or communication settings. PROFILE You can select one from the pre-determined configurations as appropriate to your specific camera installation environment. Your selection on each item in PROFILE will affect all other settings of the camera.
Page 17
CAmERA SETUP mENU Parent menu Sub-menus bACKLIGHT IRIS WDR LEvEL Custom Setting Custom Setting mOTION SHUTTER SENSE UP NIGHT DAy/NIGHT WHITE bAL NIGHT bRIGHTNESS DETAIL Z-2430P(D)-3430P(D)-ENG.indd 17 STANDARD LEvEL WEIGHT Custom Setting Custom Setting WHITE bAL Custom Setting Custom Setting (F.FAST) (F.FAST) MEDIUM...
setup CAmERA SET You can configure the general settings of the camera module. Select <mAIN mENU> - <CAmERA SET>. The Camera Setup menu appears. Change the settings as necessary, or select an item to check. CAmERA ID Provide the ID and location for a camera that displays on the screen. Select <CAmERA SET>...
Page 19
IRIS The IRIS menu is useful if you set to adjust the intensity of radiation incoming to the camera. ALC : Adjust the open and close of the iris. - LEVEL : Select an overall brightness level. - BLC : With <bACKLIGHT> set to <bLC>, you can specify the BLC area.
Page 20
setup With this, you can adjust the AGC level of a camera. With AGC active, if the signal strength falls below the standard level, AGC will amplify the video signal to automatically improve the sensitivity. If <SENS-UP> is set to <OFF> or <FIx> mode, the <mOTION>...
Page 21
SHUTTER You can select a fixed fast electronic shutter speed in 7 options ranging from 1/100(NTSC) or 1/120(PAL) to 1/10k, which is mostly used to take a picture of a fast moving object. As long as SENSE UP is set to AUTO, FIXED / FLICKERLESS to ON / BACKLIGHT to WDR, the SHUTTER menu is not available.
Page 22
setup DAy/NIGHT You can specify a recording mode according to the scene. Select <CAmERA SET> - <DAy/NIGHT>. Select a screen transition mode according to the illumination, and set options as appropriate. DAY : Fixed to DAY mode, regardless of the scene.
If <BACKLIGHT> is set to <BLC>, the MASK AREA function is not available. EXT : The interface to an external alarm enables an automatic switch between DAY and NIGHT mode. If you use an infrared light source while in AUTO mode, this may cause a failure in AUTO SWITCH or AUTO FOCUS.
Page 24
setup Select <CAmERA SET> - <WHITE bAL>. Select a mode where you set the <WHITE bAL>. DAY : You can set the RED, and BLUE value in DAY mode. The screen will be displayed in colors according to your settings. You can set the R-GAIN, and B-GAIN value only in <AWC>...
FOCUS mODE You can select a focus mode according to the angle that you adjusted for camera recording. - AF : This will monitor the screen continuously to focus automatically. If you adjust the focus manually, that will operate the same as in <mF>.
setup DIGITAL ZOOm You can set the maximum allowable digital zoom ratio. Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of x43. If you set DIGITAL ZOOM to x16, you can take a shot at up to x688 (43x16). When you set DISPLAY ZOOM as on, you may see zoom value on the screen.
You can view a main image with a sub image on the same screen. If more than one PRIVACY ZONE is specified, and PRIVACY SET to <ON>, the PIP function is not available. As long as SENSE UP is set to FIXED, PIP menu is not available. According to the luminance, PIP will disappear if the SENSE UP menu is set to AUTO.
setup ADvANCED You can detect motions and mark the video that contains such motion, and enables tracking of the movement. Selecting the <FIxED/mOvED> option will mark a region if an existing object disappears, or a new object appears and fixed for a certain period of time.
PRIvACy ZONE You can set up to 12 privacy zones that will be hided for privacy of the subject when recording. Zone Setup Select <mAIN mENU>-<PRIvACy ZONE>. Select the number of the zone and press [ENTER]. The Zone setup screen appears. Select the <ZOOm>...
setup PRESET This function provides preset camera settings such as zoom and focus so to enable quicker and easier accessing and monitoring, which supports up to 512 presets. Select <mAIN mENU>-<PRESET>. Select the preset number. Select <POSITION>. Set <PRESET ID> to <ON> and enter the name.
OTHER SET You can reset the system by running FACTORY DEFAULTS, or set the font color etc. Select <mAIN mENU>-<OTHER SET>. Select each item and set appropriately. Language Select <LANGUAGE> and use the left/right button to select a preferred display language. ExTERNAL TRG Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the...
BAUD RATE ADDRESS TYPE PROTOCOL ADDRESS COMM. TYPE BAUD RATE SERIAL NO. CAMERA VER. Near COMMUNICATION SAMSUNG-E 9600 SYSTEM INFO 4 _ 43ZOM _ WDR _ N SAMSUNG-E RS485, HALF 9600 000000000000000 v2.00 _ 100000 2010-5-26 16:42:2...
appendix SHORTCUT KEyS You may control this camera by using Controller (SSC-5000). CAmERA SET Function Z-2430P(D)-3430P(D)-ENG.indd 33 Function DAY/NIGHT - DAY DAY/NIGHT - NIGHT DAY/NIGHT - AUTO DAY/NIGHT - EXT IRIS – ALC – BACKLIGHT – WDR IRIS – ALC – BACKLIGHT – OFF IRIS - ALC IRIS - MANU FOCUS MODE –...
appendix SpecificationS item product type power Source power consumption tV Standard image Sensor effective pixels tV line frequency Synchronization Resolution S/n Ratio Minimum subject illumination 34_ appendix Z-2430P(D)-3430P(D)-ENG.indd 34 Description Power Zoom Camera SCZ-2430PD/2430ND/3430PD/3430ND: DC 12V SCZ-2430P/2430N/3430P/3430N: AC 24V (60Hz),DC 12V SCZ-2430PD/2430ND/3430PD/3430ND: 4.2W SCZ-2430P/2430N/3430P/3430N: 5.6W SCZ-2430ND/3430ND/2430N/3430N: NTSC STANDARD COLOR SYSTEM...
Page 35
Item Signal Output Lens Electronic shutter speed DIGITAL ZOOm White balance Operation Temperature Operation Humidity Dimensions (WxHxD) Weight Product Color Z-2430P(D)-3430P(D)-ENG.indd 35 Description SCZ-3430PD/3430ND/3430P/3430N: x128 WDR is not available for SCZ-2430PD/2430ND/2430P/2430N. COMPOSITE VIDEO OUT : 1.0 Vp-p 75 ohms/BNC x43 Zoom Lens Integrated Focal length : 3.2 ~ 138.5mm Aperture : F1.65(Wide) F3.7(Tale) - MOD(Minimum Object Distance) : 1000mm...
Page 36
Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com Z-2430P(D)-3430P(D)-ENG.indd 36 SAMSUNG TECHWIN EUROPE LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 Part No.: Z6806135401A(00) 2010-5-26 16:42:2...