Table of Contents
Advertisement
14
Important information regarding the HDMI connection
There are cases where you may not be able to route HDMI signals through this receiver (this depends on
the HDMI-equipped component you are connecting-check with the manufacturer for HDMI compatibility
information).
If you aren't receiving HDMI signals properly through this receiver (from your component), please try one of the
following configurations when connecting up.
Configuration A
Use component video cables to connect the video output of your HDMI-equipped component to the receiver's
component video input. The receiver can then convert the analog component video signal to a digital HDMI sig-
nal for transmission to the display. For this configuration, use the most convenient connection (digital is recom-
mended) for sending audio to the receiver. See the operating instructions for more on audio connections.
Note
The picture quality will change slightly during conversion.
Configuration B
Connect your HDMI-equipped component directly to the display using an HDMI cable. Then use the most conve-
nient connection (digital is recommended) for sending audio to the receiver. See the operating instructions for
more on audio connections. Set the display volume to minimum when using this configuration.
Notes
! If your display only has one HDMI terminal, you can only receive HDMI video from the connected component.
! Depending on the component, audio output may be limited to the number of channels available from the
connected display unit (for example audio output is reduced to 2 channels for a monitor with stereo audio
limitations).
! If you want to switch the input function, you'll have to switch functions on both the receiver and your display
unit.
! Since the sound is muted on the display when using the HDMI connection, you must adjust the volume on the
display every time you switch input functions.
Cleaning the unit
! Use a polishing cloth or dry cloth to wipe off dust and dirt.
! When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with
water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers.
! Never use thinners, benzene, insecticide sprays or other chemicals on or near this unit, since these will cor-
rode the surface.
Glossary
Audio formats/Decoding
Dolby
The Dolby technologies are explained below. See http://www.dolby.com for more detailed information.
Dolby Digital
Dolby Digital is a multichannel digital audio coding system widely used in cinemas, and in the home for DVD and
digital broadcast soundtracks.
Dolby TrueHD
Dolby TrueHD is the lossless encoding technology developed for high-definition optical discs in the upcoming
era.
Dolby Digital Plus
Dolby Digital Plus is the audio technology for all high-definition programming and media. It combines the effi-
ciency to meet future broadcast demands with the power and flexibility to realize the full audio potential expected
in the upcoming high-definition era.
Dolby Digital Surround EX
Dolby Digital Surround EX (the EX stands for EXtended) is an extension of Dolby Digital encoding whereby a
surround back channel is matrixed into the surround left/right channels for 6.1 channel playback. This allows for
compatibility with Dolby Digital 5.1 channel decoding, as well as for decoding using Dolby Digital EX.
Dolby Pro Logic IIx and Dolby Surround
Dolby Pro Logic IIx is an improved version of the Dolby Pro Logic II (and Dolby Pro Logic) decoding system.
Dolby Surround is an encoding system which embeds surround sound information within a stereo soundtrack,
which a Dolby Pro Logic decoder can then use for enhanced surround listening with greater sound detail.
Dolby Pro Logic IIz
Adding a pair of speakers above the front left and right speakers adds expressiveness in the vertical direction to
the previous horizontally-oriented sound field. The height channel strengthens the sound field's sense of three-
dimensionality and air, producing presence and expansion.
DTS
The DTS technologies are explained below. See http://www.dts.com for more detailed information.
DTS Digital Surround
DTS Digital Surround is a 5.1-channel audio coding system from DTS Inc. now widely used for DVD-Video, DVD-
Audio, 5.1 music discs, digital broadcasts, and video games.
DTS-HD Master Audio
DTS-HD Master Audio is a technology that delivers master audio sources recorded in a professional studio to
listeners without any loss of data, preserving audio quality.
DTS-HD High Resolution Audio
A high definition audio technology by which signals can be transferred over HDMI cables.
DTS-ES
DTS-ES (the ES stands for Extended Surround) is a decoder that is capable of decoding both DTS-ES Discrete 6.1
and DTS-ES Matrix 6.1 encoded sources.
DTS Neo:X
DTS Neo:X can generate 11.1 channel surround sound from any matrixed stereo source (such as video or TV) and
from 5.1 channel sources.
113
Additional information
Advertisement
Table of Contents
