Retekess TR107 - AM/FM 2 Band Radio Manual

Table of Contents

FUNCTION PARTS

Move the power switch (6) between on and off to control.
Plug in earphone into earphone jack (7).
Move band switch (5) to the band you want to listen: AM/FM or FM Stereo, after band selected, turn the tuning knob (4) and watch the dial pointer (3) on dial scale (2) to search your desired station program.
Use volume control (1) to regulate the large or small volume of the sound, what's more, on the basis of personal interest, you can also move the power switch (6) to BBS on for the bass boost sound effect when listen to radio.

For keeping good performance

Avoid fierce lash, falling into the ground.
Do not put the radio in the place where is under sunshine, hot or humid.
If the sound is distorted or the volume is faint, please change the battery in time.
In order to prevent the leakage of the electrolysis liquid or danger of explosion, do not charge, heat or resolve the batteries.
If you do not use the radio for a long time, please take out the battery, lest the leakage of the battery corrodes the parts in the radio.
Each index of the radio is adjusted well, so please do not adjust the components in the radio.

Use a soft cloth with detergent to clean the cabinet. Please do not use alcohol, thinner and other strong detergent to clean it.

The radio uses 2 pcs (AAA)battery, Please put the battery in battery compartment (8) according to the polarity.

When receiving FM or FM stereo, External earphone wires is used as FM antenna. So please don't roll your ear phone wires in case of reception is not good. When FM signal is weak, please move the band switch (5) to FM band to reduce noise, and if FM signal is strong, please turn to FM.Stereo for best reception.
When receiving AM, it's using the internal magnetic antenna. You can get the optimum reception by rotating the direction of the radio.