Using the Phone
Receiving a Call
When you receive a call, the phone rings while the LCD displays the incoming call information.
To answer an incoming call:
• Lift the handset or press the
To end a call:
• Hang up the handset. If using the speakerphone, press the
Placing a Call
Calls can be placed with the handset on-hook or off-hook. This is similar to a mobile phone. The
phone supports a technique called 'store and forward dialing'. After you dial a digit, the phone
waits about 5 seconds for additional digits. If you do not dial additional digits, the phone sends
the digits you dialed to the phone system for processing. When done dialing, press
the call immediately.
To place a call:
• Lift the handset or press the
• Dial the destination number. After a short delay, the phone will send the number. Optionally,
press
• When connected to the remote party, the LCD displays the elapsed call time.
To end a call:
• Hang up the handset. If using the speakerphone, press the
Using the Phone
?
to place the call immediately.
button to activate the speakerphone.
button to activate the speakerphone.
Page 53
button.
?
to place
button.
FortiFone User Guide for FON-260i