Stun Server; Stun Port; Phone Settings - Fortinet FortiFone FON-260i User Manual

STUN Server

When the phone is located behind NAT and a STUN server is required, enter a STUN server IP
address or FQDN to enable this feature that helps traverse firewalls in limited conditions.
• To assign a STUN server:
• Press the
• Select 12. Stun Server then press the OK button.
• Input the Stun Server using the dial pad and press the OK button to save your entry.
• Move to another parameter with the navigation buttons and continue the session or press
the
To enter alphanumeric characters select the
for Dial Pad Mode" on page 61

STUN Port

When the phone is located behind NAT and a STUN port is required, enter a STUN port or
FQDN to enable this feature that helps traverse firewalls in limited conditions.
• To assign a STUN port:
• Press the
• Select 13. Stun Port then press the OK button.
• Input the Stun Port using the dial pad and press the OK button to save your entry.
• Move to another parameter with the navigation buttons and continue the session or press
the
To enter alphanumeric characters select the
for Dial Pad Mode" on page 61

Phone Settings

Under the Phone Settings menu item, the user parameters listed below can be changed.
1 — LCD Contrast
2 — Ring Settings
3 — Disable Ringer
4 — Flexible Key Settings
5 — Time Configuration
6 — Firmware Update
7 — Speed Dial Number
8 — Key Tone
9 — Language
Configuring your Phone
button, select 2. SIP Configuration then press the OK button.
button to exit the configuration session.
for the character mapping of dial pad digits.
button, select 2. SIP Configuration then press the OK button.
button to exit the configuration session.
for the character mapping of dial pad digits.
Page 19
button. Refer to "Appendix B. Character Table
button. Refer to "Appendix B. Character Table
FortiFone User Guide for FON-260i