Dolmar AS-3726 Instruction Manual page 6

Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear eye protection.
･
Wear ear protection.
･
Wear a helmet, goggles and ear
protection.
･
Use appropriate protection for foot-leg
and hand-arm.
･
This saw is to be used by properly
trained operators only.
･
Do not expose to rain.
･
Maximum permissible cut length
･
Direction of chain travel
･
Saw chain oil adjustment
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
of the European
and returned
noise level determined
) : 84.4 dB (A)
pA
) : 95.4 dB (A)
WA
value (tri-axial vector
END313-1
Model AS-3726
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model AS-3731
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Chain Saw
Model No./ Type: AS-3726, AS-3731
to an
Specifications: see "SPECIFICATIONS" table.
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
ENE090-1
They are manufactured in accordance with the following
standard or standardized documents:
EN ISO 11682-2
The
ENG905-1
No.4814056.14008
The EC-Type
performed by:
DEKRA Testing and Certification GmbH
Enderstraße 92b
01277 Dresden
Germany
Identification No. 2140
The technical file in accordance with 2006/42/EC is
available from:
ENG900-1
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
sum)
6
) : 4.7 m/s
h
2
) : 6.3 m/s
h
2
EC-Type Examination
Examination per 2006/42/EC
2
2
ENG901-1
ENH030-5
Certificate
was