Download Print this page

Equinox Systems FUSION SPOT MKIII User Manual page 6

Advertisement

4. How To Control The Unit
1. Master/slave built-in preprogram function
2. Universal DMX controller
There is no need to turn the unit off when you change the DMX address as
new DMX address setting will take effect at once. Every time you turn the
unit on, it will show "
"on the display and move all the motors to
their 'home' position and you may hear some noises for about 20 seconds.
After that the unit will be ready to receive a DMX signal or run the built in
programs.
4.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control
the other units to give an automatic, sound activated, synchronized light
show. This function is good when you want an instant show. You have to
set the first unit as master and select show 1, show 2, show 3 or show
4 from the Show Mode. The other unigts must be set to either Slave 1
(normal) or Slave 2 (2 light show) mode. A DMX cable between the units
for daisy chaining is needed.
2-light show
In slave mode, Slave 1 means the unit works normally and Slave 2
means 2-light show. In order to create a great light show, you can set
Slave 2 on the second unit to get a random mirror image of master unit
includes pan and tilt inversion.
4.2 DMX Controller
By using a universal DMX controller to control the units, you will need to
set a DMX address from 1 to 512 so that the units can receive a DMX
signal. Press the MENU button until
Press the ENTER button and the display will blink. Use the DOWN and
is showing on the display.
UP buttons to change the DMX-512 address. Once the address has been
selected, press the ENTER button to confirm. To go back to the functions
without any changes press the MENU button again. Press and hold the
MENU button one second or wait for one minute to go back to the main
menu.
Please refer to the below diagram to address your first 4 units:
Channel
Unit 1
mode
Address
1 channel
1
8 channel
1
10 channel
1
4.3 DMX 512 Configuration
1 CHANNEL MODE
Channel
Function
Random shows
Show 4
Show 3
1
Show 2
Show 1
Blackout
Unit 2
Unit 3
Unit 4
Address
Address
Address
2
3
4
9
17
25
11
21
31
Value
248-255
188-247
128-187
068-127
008-067
000-007

Advertisement

loading

This manual is also suitable for:

Eqled008b