Related Manuals for Equinox Systems EQLED069A
Summary of Contents for Equinox Systems EQLED069A
- Page 1 Fusion 100 Spot MKII User Manual Order codes: EQLED069 - Black Housing EQLED069A - White Housing...
-
Page 2: Safety Advice
Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! • Before your initial start-up, please make sure that there is no damage caused during transportation. • Should there be any damage, consult your dealer and do not use the equipment. • To maintain the equipment in good working condition and to ensure safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual. • Please note that damages caused by user modifications to this equipment are not subject to warranty. CAUTION! CAUTION! TAKE CARE USING KEEP THIS EQUIPMENT THIS EQUIPMENT! AWAY FROM RAIN, HIGH VOLTAGE-RISK MOISTURE AND LIQUIDS OF ELECTRIC SHOCK!! IMPORTANT:... - Page 3 • Gobo wheel: 5 rotating gobos + open • IEC power input • Colour wheel: 7 colours + open • 3-Pin XLR input/output • DMX channels: 5/8 or 15 selectable • Fan cooled • Auto, sound active and master/slave modes Specifications Power consumption 10° - Lux 52800 13200 5870 3300 2110 Power supply 100~240V, 50/60Hz Fuse F2A 250V Dimensions 330 x 198 x 146mm 10° Weight 4.4kg Order codes EQLED069 - Black Housing EQLED069A - White Housing 198mm 146mm www.prolight.co.uk Fusion 100 Spot MKII User Manual...
-
Page 4: Technical Specifications
Technical specifications www.prolight.co.uk MENU DOWN ENTER DMX INPUT DMX OUTPUT In the box: 1 x fixture, 1 x power cable, 01 - LED display 05 - DMX output socket 1 x omega clamp, 02 - Function buttons 06 - IEC power input socket 1 x eye bolt 03 - Microphone 07 - Fuse F2A 250V & 1 x user manual 04 - DMX input socket 08 - Fan www.prolight.co.uk Fusion 100 Spot MKII User Manual... -
Page 5: Master/Slave Mode
Operating instructions Operating instructions A 0 0 1 A 0 0 1 DMX address setting A 5 1 2 5 C h C H N d 8 C h Channel modes 1 5 C h H I s P S P N d Pan/tilt speed setting L o S P N A s t... - Page 6 Operating instructions DMX mode: Operating in a DMX control mode environment gives the user the greatest flexibility when it comes to customising or creating a show. In this mode you will be able to control each individual trait of the fixture and each fixture independently. A001 To access the DMX address mode, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the required DMX address. Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. PLEASE NOTE: When the unit is receiving DMX DMX channel mode: the first red dot on the display will flash. To access the DMX channel mode, press the 8 channel mode: “UP” button on the front of the unit to show CHNd Channel Value Function on the LED display. Now press the 000-255 Pan adjustment 0-540° “ENTER” button and use the “UP” and “DOWN” 000-255 Tilt adjustment 0-210° buttons to choose one of the 5/8 or 15 DMX 000-255 Master dimmer (0-100%) channel modes. Press the “ENTER” button to 000-013 Open (white) confirm the setting.
- Page 7 Operating instructions 15 channel mode: Channel Value Function Channel Value Function 000-255 Pan adjustment 0-540° 000-009 Rotation stop 000-255 Pan fine adjustment Forward gobo rotation 010-129 (fast-slow) 000-255 Tilt adjustment 0-210° CH10 130-134 Rotation stop 000-255 Tilt fine adjustment Reverse gobo rotation 000-255 Pan/tilt speed 135-255 (slow-fast) 000-255 Master dimmer (0-100%) CH11 000-255 Focus 000-009 Blackout 000-007 Open (white) CH12 010-245...
- Page 8 Operating instructions Pan/tilt speed setting: SPNd To access the pan/tilt speed setting, press the “UP” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose HISP LoSP between (fast) or (slow). Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Master/slave mode: SLNd To set the master unit, press the “UP” button on the front of the master unit to show on the LED Nast display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose . Press the “ENTER” button to confirm the setting. Then select your desired program (sound active or one of the show modes). SLNd To set the other units in slave mode, press the “UP” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose SL 1 either . Press the “ENTER” button to confirm the setting. The unit will now run in sequence with the master unit. To exit out of any of the above options, press the “MENU” button. Please ensure that all slave units are set to the same DMX channel mode as the master unit. Show mode: ShNd To access the show modes, press the “UP” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose SH 1 SH 4 between . Press the “ENTER” button to confirm the setting.
- Page 9 Operating instructions Pan invert setting: To access the pan invert setting, press the “UP” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between or . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Tilt invert setting: To access the tilt invert setting, press the “UP” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between or . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Display invert setting: dISP To access the display invert setting, press the “UP” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between or . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Reset factory settings: rFAC To reset the units factory settings, press the “UP” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between (reset) or . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Pan/Tilt/Zoom home position: To access the pan/tilt/focus home position setting, press the “UP” button on the front of the unit to Ad t...
-
Page 10: Dmx Setup
DMX setup Setting the DMX address: The DMX mode enables the use of a universal DMX controller. Each fixture requires a “start address” from 1- 512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would read data from channels: 100,101,102,103,104,105 and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in the chain starts at 107. DMX 512: DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions form the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a data “out” terminal). DMX linking: DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller, as long as all fixtures and the controller are DMX compliant. To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned to a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain. DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. -
Page 11: Line Termination
DMX setup Notice: Be sure to follow the diagrams below when making your own cables. Do not connect the cables shield conductor to the ground lug or allow the shield conductor to come in contact with the XLRs outer casing. Grounding the shield could cause a short circuit and erratic behaviour. Special note: Line termination: When longer runs of cable are used, Termination reduces signal transmission you may need to use a terminator on problems and interferance. it is always advisable to connect a DMX terminal, the last unit to avoid erratic behaviour. (resistance 120 Ohm 1/4 W) between pin 2 Using a cable terminator will decrease (DMX-) and pin 3 (DMX+) of the last fixture. the possibilities of erratic behaviour. (3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89) 5-pin XLR DMX connectors: Some manufactures use 5-pin XLR connectors for data transmission in place of 3-pin. 5-pin XLR fixtures may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be used. The diagram below details the correct cable conversion. -
Page 12: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Fusion 100 Spot MKII User Manual...