Equinox Systems FUSION SPOT MKIII User Manual page 4

PAN INVERT
TILT INVERT
TEST
VER
RSET
DMX Address Setting
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to choose the address
to confirm. To go back to the functions without any changes press the
MENU button again. Press and hold the MENU button for one second or
wait for one minute to go back to the main menu.
Channel Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
Channel) mode, (8 Channel) mode or
Once the mode has been selected, press the ENTER button to confirm. To
go back to the functions without any changes press the MENU button
again. Press and hold the MENU button for one second or wait for one
minute to go back to the main menu.
Master Mode or
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
YES
NO
YES
NO
Self-Test
Software Version
RSET
. Press the ENTER button and the
. Press the ENTER button and the
(10 Channel) mode.
Slave Mode
. Press the ENTER button and the
(Slave 1), (Slave 2) or
been selected, press the ENTER button to confirm. To go back to the
functions without any changes press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back to
the main menu.
Show Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(show 1) or
Once the mode has been selected, press the ENTER button to confirm. To
go back to the functions without any changes press the MENU button
again. Press and hold the MENU button for one second or wait for one
minute to go back to the main menu.
Sound Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(1
(sound on) or
press the ENTER button to confirm. To go back to the functions without
any changes press the MENU button again. Press and hold the MENU
button for one second or wait for one minute to go back to the main
menu.
Sound Sensitivity
Press the MENU and use the UP and DOWN buttons to select
select the sound sensitivity between value 0 and 100. Press the ENTER
button for confirmation after value selection. To go back to the functions
(Master) mode. Once the mode has
. Press the ENTER button and the
(show 2) or (show 3) or
. Press the ENTER button and the
(sound off) mode. Once the mode has been selected,
(show 4) mode.
and