S
F
P E C I A L
E AT U R E S
Dolby Surround Output Table (Output connector and signals)
Playback/Broadcast
Mode
Signal
Normal
Mono
Stereo
Wide
Mono
Stereo
Mono
Phantom
Stereo
Mono
Off
Stereo
: Sound.
: Only bass of the sound (weak).
: No Sound.
Choosing a Multi-Channel Sound (MTS)track
Depending on the particular program being broadcast, you can listen to stereo, mono, or a
Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP
has unrelated information like news or weather.)
1
Press the Menu button.
Move the joystick down to
select "SOUND", then
press the joystick to enter.
2
Move the joystick down to
select "MTS", then move the
joystick to the left or right to
select "Mono," "SAP," or
"Stereo."
Press the Menu button to exit
•
Choose Stereo for channels that are broadcasting in stereo.
•
Choose Mono for channels that are broadcasting in mono, or if you are
having difficulty receiving a stereo signal.
•
Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
Left Output
Right Output
✓ The above table applies to only
softwares, equipments (DVD, VCR,
etc.) or broadcasting signals cover-
ing Dolby Surround Output.
Center Output
Surround Output
(left and right)
Quick way to access the MTS
menu: Just press the "MTS" button
on the remote control.
The text at the bottom of the
menu tells you if the incoming
audio is stereo, SAP, or mono.
C
F
: S
HAPTER
OUR
4.8
F
PECIAL
EATURES