Rear Panel Jacks - Samsung ST-434J Owner's Instructions Manual

Y N T V
O U R E W

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a laserdisc player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a laserdisc, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.7.
ΠVHF/UHF
Connect to an antenna or to a
cable TV system.
´ WIRELESS
HEADPHONES
Connect a pair of wireless
headphones here (optional)
ˇ SUPER VIDEO INPUT
S-Video signal from an S-VHS
VCR or laserdisc player.
¨ VIDEO INPUTS
Video signals from VCRs, laserdisc
players and similar devices (Two sets
are available: Video1 and Video2).
ˆ AUDIO INPUTS
Audio signals from VCRs, laserdisc
players and similar devices.
Ø AUDIO-VIDEO
MONITOR OUTPUTS
These audio-video signals are identical to
A/V signals being displayed on the big screen.
(Typically used as the input signals for a record-
ing VCR.)
Note: The monitor out does not operate in DVD
mode.
∏ DVD INPUT
Connect video from a DVD player.
" DVD AUDIO INPUT
Connect to the audio output jacks of
a DVD player.
C
HAPTER
1.4
O : Y N TV
NE OUR EW