Rear Panel Jacks - Samsung SP-46L3HR Owner's Instructions Manual
Hide thumbs
Also See for SP-46L3HR:
- Owner's instructions manual (64 pages) ,
- Instruction manual (96 pages) ,
- Replacement instructions manual (9 pages)
Table of Contents
Advertisement
Rear Panel Jacks
Use the rear panel jacks to connect components such as a VCR. You can connect different components
such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and
three set of component video input jacks on the rear panel of your TV. For more information, please see
"Connections".
ΠANTENNA terminals
Two independent cables or antennas can be connected to these terminals.
Use "ANT 1 IN" and "ANT 2 IN" terminals to receive a signal from
VHF/UHF antennas or your cable system. Use the "ANT 1 OUT" terminal to
send the signal being received by the "ANT 1 IN" terminal out to another
component (such as a Cable Set-Top Box). The PIP channel can be received
only when a signal source is connected to "ANT 1 IN".
´ S-VIDEO INPUT jacks
Connects an S-Video signal from an S-VHS VCR or DVD player.
ˇ VIDEO/AUDIO INPUT jacks (VCR1, VCR2)
Connect video/audio signals from external sources, such as a VCR or DVD
players.
¨ VIDEO/AUDIO OUTPUT jacks
Sends a video signal from the TV to an external source, such as a VCR.
Note: It is available only in RF, Video and S-Video modes.
ˆ Component1, 2 jacks (Y, P
Use these jacks to connect the component video/audio signals from a DVD
player or a set top box when using the component video input jacks.
Downloaded from
www.Manualslib.com
, P
L, R)
,
B
R
manuals search engine
Ø PC AUDIO INPUT jacks
Connect these to the audio output jacks on your PC.
∏ PC VIDEO INPUT jack
Connect these to the video output jack on your PC .
" DVI (Digital Video Interface) AUDIO INPUT jacks
Connect to the digital audio output jacks for device with DVI output.
' DVI (Digital Video Interface) VIDEO INPUT jack
Connect to the digital video output jack for device with DVI output.
˝ HDMI (High Definition Multimedia Interface)
VIDEO/AUDIO INPUT jack
Connect to the HDMI jack for device with HDMI output.
Ô Anynet
Please refer to the Anynet Owner's Instruction.
This jack is for repair and software upgrades.
English - 11
Advertisement
Table of Contents
