Rear Panel Jacks - Samsung CT29M16MQU Owner's Instructions Manual

AA68-03465A-00Eng_XTC
Y
O U R

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 9 – 15.
ΠVIDEO INPUT jack
´ AUDIO INPUTS
ˇ AUDIO-VIDEO MONITOR
5/7/04 1:30 PM Page 7
All manuals and user guides at all-guides.com
N TV
E W
Video signals from VCRs, DVD players and similar
devices.
(INPUT1
/DVD AUDIO INPUTS
and 2)
(INPUT 2)
Audio signals from VCRs, DVD players and similar
devices.
Use these jacks to connect the audio signals from a
DVD player when using the DVD video input jacks.
When not using the DVD jacks, these audio jacks
function as audio for Video 2 or S-VIDEO.
OUTPUT jacks
These audio-video signals are identical to A/V
signals being displayed on the big screen. (Typically
used as the input signals for a recording VCR.)
¨ SUPER VIDEO INPUT jack
(CT29M16MQU/CT25M20MQU/
CT29M20MQU)
S-Video signal from an S-VHS VCR or DVD player.
Note: In S-Video mode, Audio Output depends what
kind of audio input source is connected to the side
audio input jacks (AV2).
ˆ COMPONENT VIDEO INPUT
jacks
Connect video from a DVD player.
Note: Only black and white signals are output from
a monitor in DVD mode.
Ø VHF/UHF
Connect to an antenna or to a cable TV system.
7