Control And Functions - ECG Mr. Fan Instruction Manual

CONTROL AND FUNCTIONS

Display
1. Fan speed indicator
2. Fan function indicator
3. Rotation indicator
4. Ionisation indicator
5. Timer indicator
6. Power On Indicator
7. Fan operation indicator
8. Mist effect indicator
Remote controller
1. Ionisation button
2. Rotation adjustment
button
3. Switch on / speed setting
button
4. Mist effect setting button
5. Off button
6. Timer button
Start
Insert the plug of the power cord into the mains socket. Press the ON/SPEED button, a short audible alert
sounds, the power-on light illuminates on the display and the fan starts.
ON/SPEED button
Press the ON/SPEED button, the display will show a speed value of 1 and the fan function icon will light up on
the screen at the same time. Press the ON/SPEED button again, the speed will change to medium power and
the display will show speed value 2. If you press the button a third time, the speed changes to high power
and the display shows 3. Each time the ON/SPEED button is pressed, the speed switches in a 1-2-3 sequence.
Mist effect
Press the MIST button to activate the mist effect function. The mist effect indicator lights up on the display.
Press the MIST button again to cancel the function and the mist effect indicator will go out.
10
Control panel buttons
9. On/Off switch
10. Switch on / speed setting
button
11. Mist effect setting button
12. Ionisation button
13. Rotation adjustment button
14. Timer button