Removing And Installing Hardware; Power Adapter And Power Cord - Lenovo 30G1003QGE Hardware Maintenance Manual

5
Coin-cell battery
7
Internal speaker connector
9
PCI-Express ×16 card slot
11
M.2 solid-state drive slot 1
13
M.2 Wi-Fi card slot
15
ThinkStation LED connector
17
Memory slot (SODIMM 2)

Removing and installing hardware

This section provides instructions on how to remove and install hardware for your computer. You can expand
the capabilities of your computer and maintain your computer by removing or installing hardware.
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Important safety information" on page 1.

Power adapter and power cord

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, turn off the computer and remove all connected devices and cables.
Removal steps
52
ThinkStation P360 Ultra Hardware Maintenance Manual
6
Auxiliary fan connector 1
8
Power connector for PCI-Express ×16 card
10
M.2 solid-state drive slot 2
12
M.2 power connector
14
Auxiliary fan connector 2
16
Memory slot (SODIMM 4)
18
PCI-Express ×8 card slot