Switching The Sound Off Temporarily; Selecting The Sound Mode - Samsung SP-42W5HF Owner's Instructions Manual

ENG

Switching the Sound Off Temporarily

Selecting the Sound Mode

32
You can switch the sound off temporarily.
Example: You wish to answer the telephone.
1
Press the MUTE button (
Result: The sound is switched off and "
2
When you wish to turn the sound back on, press the MUTE button
( ) again or either of the volume buttons.
Result: The sound comes back on at the same volume as
before and the "
(depending on the model)
The "S.MODE" button displays/controls the processing and output
of the audio signal. When power is switched ON, the mode is
automatically preset to either "Dual-I" or "Stereo", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
➣
◆ If the receiving conditions deteriorate, listening will be easier if
the mode is set to the "Mono" position using the S.MODE button.
◆ If the stereo signal is weak (or if intermittent Stereo-Mono) and
automatic switching occurs, then switch to the "Mono" mode.
◆ When receiving mono sound in the AV mode, connect to the "L"
input jack on the panels. If the mono sound comes out only from
the left speaker, then press the S.MODE button.
) on the remote control.
" is displayed.
" indication disappears.
On-screen indication
Mono (Normal use)
Mono ↔ Mono
Nicam (Normal)
Stereo ↔ Mono
Nicam (Normal)
Dual-I → Dual-II → Mono
Nicam Nicam (Normal)
Mono (Normal use)
Dual-I ↔ Dual-II
Stereo ↔ Mono
(Forced Mono)