New Av-Link Feature; Connecting An Av-Link Vcr - Samsung SP-42W5HF Owner's Instructions Manual

ENG
Rear of the TV
SCART
cable
Aerial
output
DECODER
L
G
AV-Link
M
TEST
A
COUL N/B

New AV-Link Feature

Connecting an AV-Link VCR

EXT1
AV-link
OUT TO TV
IN FROM
M
ANT.
ATT.
A
Aerial input
44
Your television is equipped with an AV-Link feature. Data received
on your television can be directly transferred to an AV-Link
equipped VCR. Devices connected via AV-Link can exchange
information.
WYSIWYR Principle
The WYSIWYR (What You See Is What You Record) principle
means that you can start recording on your VCR a programme that
you are currently watching on your TV, simply by pressing the
AV-Link Record button (
Example: If you have selected programme 3 on your TV, this
programme number is sent to the VCR and the VCR
starts recording the corresponding broadcast on its
own tuner.
Advantages:
You can record a programme without having to:
◆ Switch on the VCR
◆ Select the same programme on the VCR
◆ Start recording by pressing the record button on the
VCR remote control
Automatic Channel Downloading
The AV-Link feature also allows the channels to be automatically
downloaded from the TV to the VCR.
➢
AV-Link (WYSIWYR) works as per instructions but only
functions with pre-set stations and not any AV Input.
To connect an AV-Link VCR to your television, you must use a
SCART cable.
1
Plug the aerial input cable into the appropriate socket on the VCR.
2
Connect one end of the SCART cable to the AV-Link EXT1 socket
on the rear of the television.
➢
You can only use the EXT1 socket on your television to
connect the AV-Link VCR.
3
Connect the other end of the SCART cable to the appropriate
AV-Link SCART socket on the VCR.
4
Select the EXT1 option and download the preset channels from
your television to your VCR by following the indications on page 45.
➢
As the EXT1 connection always receives the actual TV
tuner signal, you do not need to tune your VCR to your
television, as with a standard VCR.
) on the remote control.