Skil DL529301 Owner's Manual page 18

Driving Nuts and Bolts
WARNING
dusty, also wear a dust mask.
Variable-speed control must be used with caution for driving nuts and bolts with socket-set
attachments. The technique is to start slowly, increasing speed as the nut or bolt runs down.
Set the nut or bolt snugly by slowing the drill driver to a stop. If this procedure is not followed,
the tool will have a tendency to torque or twist in your hands when the nut or bolt seats.
Automatic Spindle Lock
The automatic spindle lock allows you to use the drill driver as a manual screwdriver. You
can give an extra twist to firmly tighten a screw, loosen a very tight screw, or continue
working when the battery charge is depleted. For manual screwdriver purposes, the chuck is
automatically locked when the tool is off.
18
Always wear safety goggles or safety glasses with side shields
during power tool operation or when blowing dust. If the operation is