Worx WG801E.X Series Original Instruction page 11

h) Keep handles and
grasping surfaces dry,
clean and free from oil and
grease. Slippery handles
and grasping surfaces do
not allow for safe handling
and control of the tool in
unexpected situations.
5.Battery tool use and care
a)Recharge only with the
charger specified by the
manufacturer. A charger
that is suitable for one type
of battery pack may create
a risk of fire when used with
another battery pack.
b)Use power tools only with
specifically designated
battery packs. Use of any
other battery packs may
create a risk of injury and
fire.
c)When battery pack is not
in use, keep it away from
other metal objects, like
paper clips, coins, keys,
nails, screws or other small
metal objects, that can
make a connection from
one terminal to another.
Shorting the battery
terminals together may
cause burns or a fire.
d)Under abusive conditions,
liquid may be ejected from
the battery; avoid contact.
If contact accidentally
occurs, flush with water.
Cordless shrub shear /
grass shear / weeder
If liquid contacts eyes,
additionally seek medical
help. Liquid ejected from
the battery may cause
irritation or burns.
e)Do not use a battery pack
or tool that is damaged
or modified. Damaged or
modified batteries may
exhibit unpredictable
behaviour resulting in fire,
explosion or risk of injury.
f)Do not expose a battery
pack or tool to fire or
excessive temperature.
Exposure to fire or
temperature above 130 °C
may cause explosion.
g)Follow all charging
instructions and do
not charge the battery
pack or tool outside
the temperature
range specified in the
instructions. Charging
improperly or at
temperatures outside
the specified range may
damage the battery and
increase the risk of fire.
6.Service
a)Have your power tool
serviced by a qualified
repair person using only
identical replacement
parts. This will ensure that
the safety of the power tool
is maintained.
11
EN