Worx WG801E.X Series Original Instruction page 10

facilities, ensure these are
connected and properly
used. Use of dust collection
can reduce
dust-related hazards.
h)Do not let familiarity
gained from frequent
use of tools allow you
to become complacent
and ignore tool safety
principles. A careless
action can cause severe
injury within a fraction of a
second.
4.Power tool use and care
a)Do not force the power
tool. Use the correct power
tool for your application.
The correct power tool will
10
do the job better and safer
at the rate for which it was
designed.
b)Do not use the power
tool if the switch does
not turn it on and off. Any
power tool that cannot be
controlled with the switch
is dangerous and must be
repaired.
c) Disconnect the plug from
the power source and/
or the battery pack from
the power tool before
making any adjustments,
changing accessories, or
storing power tools. Such
preventive safety measures
reduce the risk of starting
Cordless shrub shear /
grass shear / weeder
the power tool accidentally.
d)Store idle power tools out
of the reach of children
and do not allow persons
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous
in the hands of untrained
users.
e)Maintain power tools.
Check for misalignment or
binding of moving parts,
breakage of parts and any
other condition that may
affect the power tool's
operation. If damaged,
have the power tool
repaired before use. Many
accidents are caused by
poorly maintained power
tools.
f) Keep cutting tools sharp
and clean. Properly
maintained cutting tools
with sharp cutting edges
are less likely to bind and
are easier to control.
g)Use the power tool,
accessories and tool bits
etc. in accordance with
these instructions, taking
into account the working
conditions and the work to
be performed. Use of the
power tool for operations
different from those
intended could result in a
hazardous situation.
EN