Kohler STATEMENT K-26291T-CP Installation Instructions

Record your model number:

记录您的型号：
1430510-T2
บั น ทึ ก หมายเลขรุ ่ น ของคุ ณ :
WARNING: Risk of scalding. High water temperature can cause
severe burns. Set the valve water temperature at or below 120°F (49°C).
Refer to the temperature adjustment instructions for the valve.
CAUTION: Risk of product damage and personal injury. Keep the
product away from a heater.
Follow all local plumbing and building codes.
1A. Sealant Tape
2A. Run water to flush debris.
4A. If needed, install the flow restrictor.
6A. Periodically rub debris from the nozzles while water is running.
7A. Periodically rinse debris from the screen washer.
Need help? Contact our Customer Care Center.
• Thailand: callcenterthailand@kohler.com, +(66) 2700-9299
• Australia: 1800 KOHLER (1800-564-537)
• New Zealand: 0800-564-537
• Mainland China: +(86) 800-820-2628, +(86) 400-820-2628
• Hong Kong (China), Macau (China), Taiwan (China): +(852) 3125-7728
• Brunei, Guam, Indonesia, Japan, Malaysia, Mongolia, Philippines,
Singapore, South Korea, Vietnam: +(86) 21-2606-2572
This product is covered under the Five-Year Limited Warranty for
KOHLER ® Faucets, found in the packed Compliance Certification.
警告： 提防烫伤风险。水温过高会导致严重灼伤 。应将阀芯水温设置为
等于或低于 120°F (49°C)。请参考阀芯的温度调节说明。
小心： 提防损坏产品和人身伤害风险。产品应远离加热器。
遵守所有当地给排水及建筑规定。
1A. 密封胶带
2A. 打开供水管 ，冲洗管道中的杂质。
4A. 如有需要，安装限流器。
6A. 打开供水管，按压或摩擦花洒出水嘴，去除杂质或水垢。
1430510-T2 - B
1
A
3
1
2
A
4
A
Kohler Co.